Double-cut Shears Cleanly Cut Cold Rolled Mild Steel

Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.

Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.

Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.

Kett Tool provides manufacturers and contractors with superior maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears. At only 10 1/2 inches long and weighing just 3 pounds, the pneumatic shears deliver a powerful and precise cut in a compact and portable design.

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste curl, leaving both sides of the cut straight with no need to file or deburr.

Kett’s P-500 shears are powered by a 90 PSI air power source. The variable speed trigger lets you control speed from 0 to 2,200 RPMs and cleanly cuts 18 gauge and lighter C.R. mild steel, most grades of stainless to 20 gauge and aluminum to .090 feet thick. With cutting speeds of 180 inches per minute, the P-500 leaves behind a smooth, straight cut that’s burr free. At only 3 pounds, the lightweight, pistol grip design of the shears offer superior maneuverability and flexibility. All shear heads are precision made in the U.S. featuring A2 tool steel blades for prolonged durability.

1 Comment on "Double-cut Shears Cleanly Cut Cold Rolled Mild Steel"

  1. I’ve always wondered how they process steel. I didn’t know that there was equipment that could cut right through it! It makes sense that they would need it to get steel into the shape they need it in.

Leave a Reply