Joint and Termination Sealant Designed for Large Joints, Roof Termination Bars

JTS 1 joint and termination sealant from Mule-Hide Products Co. 

JTS 1 joint and termination sealant from Mule-Hide Products Co. The new JTS 1 joint and termination sealant from Mule-Hide Products Co.allows contractors to quickly and easily seal large joints and roof termination bars – including those submerged under water – with no sagging or shrinking and minimal odor. According to the manufacturer, the 100-percent solids, moisture-cure urethane sealant delivers excellent adhesion to EPDM and PVC membranes, concrete, masonry, wood, vinyl and other common building materials. Primer is required when using it on TPO membranes.
 
The joint and termination sealant is designed to offer exceptional workability for quick, easy application in both dry and wet surface applications. It has a tack-free time of just 30 minutes. The solids content of JTS 1 eliminates shrinking and sagging. The sealant can, therefore, be used to provide watertight closure of joints up to 2 inches wide and 1 inch deep.
 
JTS 1 is isocyanate-free, enabling it to be packaged in durable plastic cartridges without losing workability. Unlike cardboard tubes, the cartridges can be submerged under water to repair roof leaks, gutters and downspouts. They also better withstand the rigors of transportation, storage and jobsite conditions without becoming damaged.
 
Solvent-free JTS 1 has minimal odor. Its volatile organic compound (VOC) content of less than 10 grams per liter makes its use allowable in areas with VOC restrictions. It is available in eight colors – white, black, bronze, gray, limestone, wicker/tan and terra cotta.

Be the first to comment on "Joint and Termination Sealant Designed for Large Joints, Roof Termination Bars"

Leave a Reply