McElroy Metal has put together a white paper about a successful hangar re-cover for Southwest Airlines. McElroy Metal headed the team that developed, engineered, manufactured and installed the solution for the roof, which was damaged by 30 years of tropical storms, including Hurricane Charley in 2004. The 238T Symmetrical Standing Seam roofing system from McElroy Metal was installed on sub-purlins from Roof Hugger. The 238T met the wind-uplift requirements, and installation without a tear-off offered the best chance for success with minimal interruption to the daily operation. Download the white paper.
Maury Hall, U.S. Naval Academy, Annapolis, Md.
Roofing Contractor: Wagner Roofing, Hyattsville, Md.
General Contractor: C.E.R. Inc., Baltimore, (410) 247-9096
Wagner Roofing was awarded the complete replacement of all roof systems. These included an upper double-lock standing-seam copper roof system, a bullnose copper cornice transition, slate mansard, 34 dormers with double-lock standing-seam copper and fascia metal, eight copper hip metal caps and a continuous built-in gutter with decorative copper fascia. Each of the dormers also had a copper window well.
The upper standing-seam roof was removed and replaced with 24-inch-wide, 20-ounce copper coil rollformed into 1-inch-high by 21-inch-wide continuous standing-seam panels that matched the original profile. The eave bullnose, which also served as the mansard flashing, was removed and returned to Wagner Roofing’s shop where it was replicated to match the exact size and profile.
The 34 dormer roofs were replaced with 20-inch-wide, 20-ounce copper coil formed into 1-inch-high by 17-inch- wide continuous standing-seam panels. The decorative ornate fascia of the dormers was carefully removed and Wagner’s skilled craftsmen used it as a template to develop the new two-piece copper cornice to which the roof panels locked. The cheeks and face of the dormers were also re-clad with custom-fabricated 20-ounce copper.
The oversized built-in-gutter at the base of the slate mansard was removed and replaced with a new 20-ounce copper liner custom-formed and soldered onsite. The replacement included a specialty “bull-nosed” drip edge at the base of the slate and an ornate, custom-formed fascia on the exterior of the built-in gutter. The decorative copper fascia included 85 “hubcaps”, 152 “half wheels” and 14 decorative pressed-copper miters. The original hubcap and half-wheel ornaments were broken down and patterns were replicated. Each ornamental piece was hand assembled from a pattern of 14 individual pieces of 20-ounce copper before being installed at their precise original location on the new fascia. The miters were made by six different molds, taken from the original worn pieces, to stamp the design into 20-ounce sheet copper.
In all, more than 43,000 pounds of 20-ounce copper was used on the project.
Copper Manufacturer: Revere Copper Products
Maury Hall was built in 1907 and was designed by Ernest Flagg. Flagg designed many of the buildings at the U.S. Naval Academy, including the Chapel, Bancroft Hall, Mahan Hall, the superintendent’s residence and Sampson Hall. His career was largely influenced by his studies at École des Beaux-Arts, Paris. Examples of Flagg’s Beaux-Arts influence can be found in the decorative copper adorning the built-in gutter on building designs.
Maury Hall currently houses the departments of Weapons and Systems Engineering and Electrical Engineering. The building sits in a courtyard connected to Mahan Hall and across from its design twin, Sampson Hall.
PHOTO: Joe Guido
Because the show must go on, what served as a canopy-style roof at the Miller Outdoor Theater, Houston, needed repairs in short order. Byrne Metals, Humble, Texas, installed more than 18,000 square feet of copper 238T standing-seam panels during the five-month off season by calling in the rollformer from McElroy Metal that runs panels right onto the roof deck.“Everyone else who had tried to fix the problems focused on trying not to change the appearance,” says Karl Schaack, P.E., president of Price Consulting, Houston. “We realized providing a leak-free solution required some change in the appearance. We got a little pushback at first, but when we explained our design, they were just happy to know it wasn’t going to leak anymore.”
“It was a very challenging job,” says Neil Byrne, president of Byrne Metals. “This is an iconic structure in Houston, originally built in 1968. At the time, it won several awards for its design.”
Unfortunately, right from the start, the design didn’t hold up against the Texas rains. For more than 40 years, anyone who was hired to fix the problem, failed.
Schaack chose 238T symmetrical panels from McElroy Metal for the project. “It’s rigid and it meets high-wind requirements,” he says. “The 238T is symmetrical so if a panel gets damaged, you only have to replace one panel.”
The multi-million dollar renovation in Hermann Park served to correct canopy deficiencies that caused leaks above the stage as well as the audience, putting a real damper on the theater’s cultural and educational event offerings.
Byrne Metals went to work as soon as the 2013 season concluded in early November. Improvements included replacements of the east and west wings, a new soffit for the main sloped roof and the new 20-ounce copper standing-seam roof. The profile was McElroy Metal’s 238T symmetrical standing-seam panel. “Using copper helped the new roof blend in with the original framework,” Schaack says. “Especially as it ages, it will look great, like it’s been there all along.”
Changes in design to the updated roof, as well as a watertight standing seam installation, will help prevent future leaks.The roof area between the existing Corten superstructure was framed with purlins, a metal deck was installed on top of the purlins, then a 1 1/2-inch nail base was installed over the deck along with ice and water shield. A giant reverse-slope diverter was built at the intersection, where the sloping roof connected to the stage wall. Valleys were lowered below the roof plane and there was a slight change in pitch that was overcome by rounding the insulation/plywood over the pitch change.
McElroy Metal’s job-site production equipment simplified the process of installation and made the job site safer. The rollformer was hoisted to the eaves on a scissor lift where panels were conveniently run onto the roof. Not only did this method eliminate the need for an expensive crane to get panels on the roof, it was safer as some of the panels were up to 110-feet long. Because of the unique shape of the roof, panels were cut to fit on the roof.
“We specialize in the unique and difficult,” Byrne says. “This is the kind of job we like. We generally have about 20 to 30 projects under contract at any one time, but this one required a lot of personal attention from our upper management, myself included. We had as many as 30 crew members onsite, working 10-hour days and some weekends, when necessary.”
As with all Byrne Metals jobs, safety was a major consideration during the evaluation and installation. “There are three things we consider important to staying in business,” Byrne says. “Safety, quality and productivity. We have a fulltime safety person on staff making sure we’re working safely on all jobs. This job required us to take into consideration some other factors like guys working long days, getting fatigued and the speed at which we had to work to complete the job on time. We enjoy a good challenge and Miller Outdoor Theater falls into that category.”
PHOTOS: McElroy Metal