A Standing-seam Roof Protects a Bank and Its Offices for the Long Term

Located on a high-traffic, signature intersection in Taylorville, Ill., Palmer Bank sought a timeless design that would visually represent its strength and stability to the community of just more than 11,000 people.

Design for the project was provided by The Redmond Co., Waukesha, Wis. The design team blended extensive detailing and profiling of the metal roof with a masonry façade to create an attractive prairie-style look.

Design for the project was provided by The Redmond Co., Waukesha, Wis. The design team blended extensive detailing and profiling of the metal roof with a masonry façade to create an attractive prairie-style look.

Design for the project was provided by The Redmond Co., Waukesha, Wis. The design team blended extensive detailing and profiling of the metal roof with a masonry façade to create an attractive prairie-style look.

“We clearly wanted to take advantage of the great location with a strong, timeless design,” says Andy Young, The Redmond Co.’s director of project development and construction manager on the project. “We presented two options to the bank regarding the roof … It was pretty unanimous that everyone liked the standing-seam profile look. We also liked the life-cycle cost of the roof since the bank plans to be the owner of this building for the long term.”

Installation of the standing-seam roof was completed by E.L. Pruitt Co., Springfield, Ill.

Installation of the standing-seam roof was completed by E.L. Pruitt Co., Springfield, Ill.

Installation of the standing-seam roof was completed by E.L. Pruitt Co., Springfield, Ill. The crew, which consisted of six tied-off workers, installed fascia, gutters, downspouts and soffit. Flashing components were custom-fabricated in E.L. Pruitt’s shop.

The metal is coated with ENERGY STAR-approved colors and is vented for optimal airflow, which greatly in-creases the roof’s longevity and energy efficiency. The metal was installed over roof-deck protection and a self-adhered underlayment.

The metal is coated with ENERGY STAR-approved colors and is vented for optimal airflow, which greatly in-creases the roof’s longevity and energy efficiency.

The metal is coated with ENERGY STAR-approved colors and is vented for optimal airflow, which greatly in-creases the roof’s longevity and energy efficiency.

According to Dallas Stephenson, E. L. Pruitt’s project manager, the roofing job took about six weeks to complete. He explains: “The most difficult part was doing all the seam layout because the product requires a progressive install, which means you can’t really start in the middle of the roof and work both directions. You have to start in a corner and work out of a corner and then work into a corner and then work back out of the corner.”

The metal was installed over roof-deck protection and a self-adhered underlayment.

The metal was installed over roof-deck protection and a self-adhered underlayment.

Stephenson notes symmetrically lining up seams on the bank’s dormers and then across the roof was challenging. “Once we got all that figured out—took all the measurements on the job site and confirmed them—it went fairly smoothly,” he says.

“We knew the many hips and valleys would be somewhat of an installation challenge, but the installer did a terrific job,” Young notes.

Stephenson is quick to return the compliment: “Scott Brooks, site superintendent, and Andy Young from The Redmond Co. did an excellent job of picking a good team to build Palmer Bank. Everything just worked out great!”

PHOTOS: Petersen Aluminum Corp.

Team

Roofing installer: E.L. Pruitt Co., Springfield, Ill.
Designer: The Redmond Co., Waukesha, Wis.

Roof Materials

Approximately 9,000 square feet of 24-gauge, 16-inch Snap-Clad panels and 2,200 square feet of PAC-850 Soffit Panels were utilized to meet the design objectives. The Snap-Clad panels were finished in Charcoal and the 0.032 PAC-850 Panels were finished in Slate Gray.
Panels’ manufacturer: Petersen Aluminum Corp.
Roof deck protection manufacturer: Deck-Armor from GAF
Underlayment manufacturer: Grace Ice and Water Shield