CertainTeed Employees Roll Up Their Sleeves to Assist Homes for Our Troops

CertainTeed Corporation, along with employees from its Kansas City, Kansas, insulation plant and professional partners are rolling up their sleeves to assist Homes for Our Troops (HFOT). HFOT is a national, non-profit organization dedicated to building specially adapted, mortgage-free homes for severely injured Veterans. The latest team effort shows support and appreciation for a local Lee’s Summit, Missouri Veteran.
 
CertainTeed offers a portfolio of roofing, insulation, drywall, siding, housewrap and trim for builds across the U.S. CertainTeed’s involvement also extends to employees actively participating in HFOT local community events, as well as builder, distributor, and company contractor partners who assist with product delivery and installation.
 
Due to the proximity to the company’s insulation manufacturing facility in Kansas City, Kansas, local CertainTeed employees are able to do even more for Marine Sgt. Dustin Johns, taking action along with more than 150 people to assist with landscaping and other exterior beautification details during Volunteer Day. Several supporters, including long-time Kansas builder and HFOT partner Sallee Homes of Lee’s Summit, was on hand when the home was officially presented to the Johns family during the formal Key Ceremony.
 
A technician with the 2nd Explosive Ordnance Disposal (EOD) Company, Sgt. Johns was clearing an area of explosive hazards in Sangin Valley, Afghanistan on November 12, 2011 when he stepped on an improvised explosive device (IED). The blast resulted in the amputation of both legs and two fingers on his right hand.
 
He was fitted with prosthetics for both legs, but learning to walk again is only one challenge of day-to-day life. Sgt. Johns’ mortgage-free home provided by HFOT is specially designed to accommodate his needs and is a crucial step in helping his family rebuild their lives.
 
“When we heard about Homes for Our Troops building a home so near our largest insulation manufacturing facility, our staff, both at the corporate and local level, were excited at the chance to do more than usual for the local hero,” said Greg Silvestri, president of CertainTeed Insulation. “Everyone who has touched this project, from our builder, distributor and contractor partners to the employees at the plant to our company sales territory managers, have expressed their thankfulness for being able to step in, and eagerness to participate in another build when the opportunity presents itself.”
 
In conjunction with CertainTeed, Insulate America has participated in a number of builds since becoming involved with HFOT in the past few years.
 
“We do charitable work within the communities that we serve. Whether that’s a check, or with some hands on work. It’s rewarding when you come to the home that is being built for one of our Veterans to see the impact and the community coming together,” said David Beam, president of Insulate America. “It’s a small token of appreciation for their sacrifice and our freedom.”

This was the first time A+ Insulation, an Insulate America member contractor from Edwardsville, Kansas, provided installation services for a HFOT build.

“I really had no idea the lengths Homes for Our Troops goes through to personally customize each home to benefit the life of each deserving Veteran. It’s amazing,” said Mike O’Hara, president of A+ Insulation. “And CertainTeed Sales Territory Manager John Larkin was wonderful to work with, making it easy to complete the insulation installation on schedule.”
 
Since its founding in 2004, HFOT has built more than 220 mortgage-free, specially adapted energy-efficient homes for Veterans severely injured in combat after September 11, 2001. Each four-bedroom, two-bath home is Americans with Disabilities Act (ADA) compliant, complete with roll-in showers, roll-under cooktops and sinks, and other standard accessibility items. Construction of a home takes six to seven months, with the cost of each build averaging $430,000.
 
To learn more about CertainTeed’s Homes for Our Troops partnership, visit www.certainteed.com/followtheproject.

RoofPoint Administration Transfers to Roofing Industry Alliance for Progress

The Roofing Industry Alliance for Progress announces the administration of RoofPoint has been transferred to the Alliance. RoofPoint is a voluntary, consensus-based green building rating system that provides a means for building owners and designers to select nonresidential roof systems based on long-term energy and environmental benefits.

Originally developed by the Center for Environmental Innovation in Roofing and co-sponsored by the Alliance, RoofPoint is a roofing-specific version of a green building rating system that promotes an environmentally responsible built environment.

“The increasing need for energy efficient and environmentally friendly roof systems makes RoofPoint an important component of our industry,” says Alliance president, James T. Patterson C.P.M of CentiMark Corporation, Canonsburg, Pa. “We are pleased to have the opportunity to manage RoofPoint, and to continue the essential role it plays in promoting environmentally sustainable buildings.”

To ensure a smooth transfer of RoofPoint to the Alliance, a task force has been established to examine RoofPoint’s data and determine next steps.

Task force members are Rob Therrien, president of The Melanson Co. Inc., Keene, N.H.; Helene Hardy-Pierce, vice president of technical services, codes and industry relations for GAF, Parsippany, N.J.; Brian Whelan, senior vice president of Sika Sarnifil Inc., Lyndhurst, N.J.; Jim Barr, president of Barr Roofing Co., Abilene, Texas; and Mark Graham, vice president of technical services for the National Roofing Contractor Association (NRCA), Rosemont, Ill.

The task force will present its recommendations to the Alliance Board of Trustees during its Nov. 17 meeting in Chicago.

Atlas Roofing Supports Wildlife Biologists Expedition With Build of Tiny House

Atlas Roofing is supporting a group of Canadian-based wildlife biologists this summer on their expedition to study the whale and dolphin species of the Gulf of St. Lawrence. Led by Katy Gavrilchuk and David Gaspard, in association with a non-profit organization, the Mingan Island Cetacean Study, the expedition will focus on the long-term monitoring of large baleen whales on an important summer feeding ground. With the assistance of donations from Atlas Roofing and several other companies, Katy and David were able to build an environmentally sound tiny house that will serve as their mobile research base. It will assist in their expedition, while keeping their carbon footprint to a minimum.

“This expedition is truly one of a kind and Atlas is very excited to be a part of this innovative project,” said Tom Robertson, wall insulation business manager for Atlas. “What Katy and David are doing with their mobile research base is both smart and unique. We can’t wait to see what they are able to achieve in both their studies and in the name of environmental awareness with the help of the tiny home.”

Background on the Expedition
Studying mammals, such as dolphins and whales, requires the ability to move at any time in order to properly observe and track these amazing creatures. In the biologists’ previous expeditions, that level of flexibility was not economically or plausibly feasible. In addition, the biologists had a desire to raise awareness of the consequences of global consumption and reduce their own personal impact on the environment while still accomplishing their research.

In order to address these issues, they came up with the idea of constructing a tiny home on wheels, giving them the ability to overcome the logistical obstacles of studying mammals on the move, while also raising environmental awareness.

Building the Tiny House
For Katy and David’s tiny house, they developed a set of criteria for the products used in the construction and one of the most important was that the supplier companies be eco-conscious.

The wildlife biologists found that Atlas products are highly energy efficient, water and fire resistant and are manufactured with sustainable processes.

While the environmental aspect of the tiny homes insulation was important, Atlas had to meet other criteria as well including:
·High thermal resistance: A smaller space can lose heat quickly and the tiny home needed to be used in varying weather and temperature conditions.
·Lightweight: Since the tiny house would be attached to a trailer, the biologists had to respect the maximum load capacity and save weight where they could.

After the wildlife biologists determined Atlas met their needs both environmentally and logistically, EnergyShield PRO foam boards were installed in the building envelope. EnergyShield PRO wall insulation features a high R-value, Class A durable aluminum facer that also serves as a water resistive barrier, all helpful qualities for the tiny house. In addition, the insulation boards hold a Class A fire rating and can be used for exterior CI (continuous insulation) for installation over concrete, wood, wood stud and more. Because of size constraints, it was important to get the greatest insulation value possible from the few inches of space that could be allocated to insulation. With an R-value of 6.5 per inch, the highest available in the market, EnergyShield PRO was able to provide a total R-value of 22 in a 3.5 inch product. Overall, it took the wildlife biologists four days to install the Atlas insulation.

What’s Next?
The expedition is 670 miles long, and the field season will last until September 2016. The journey to the whales begins in Montreal, where the biologists will be stopping along the way in Quebec City, Tadoussac, Baie Comeau and Sept-Iles. The journey to the Gulf of St. Lawrence will serve two purposes: raise public awareness about living sustainably and ecologically, as well as monitoring for whales along the north coast of the Gulf. To follow Katy and David’s journey along the way, visit http://venturebiologists-tinyhome.weebly.com/ or BigWhaleTinyHouse.com.

CertainTeed Metal Roofing Exceeds Industry Standards

Roof specifiers and installers can now achieve project goals in fire resistance and solar reflectance more easily with CertainTeed Presidio Metal Roofing as a result of testing to the latest editions of industry performance test standards. Introduced last year, the line of steel roofing products blends the look of classic roofing materials with the exceptional wind/hail resistance and solar reflectance of metal roofing.

Specifiers now can achieve Class A fire rating with Presidio applied over a layer of a specific fire-resistant roofing membrane product paired with a single layer of select CertainTeed underlayments – a barrier board is no longer needed. Further, the Presidio metal roofing products now earn a Class B fire rating when applied over a single layer of a variety of CertainTeed roofing underlayments.

In regards to solar reflectance, seven colors from the Presidio roofing product line have recently been listed for solar reflectance and thermal emittance by the Cool Roof Rating Council (CRRC). Presidio Tile colors English Toffee, Nutmeg, Speckled Bronze and Terra Cotta, and Presidio Shake colors Ash, Sand Dune and Weathered Wood are listed by CRRC with initial solar reflectance values ranging from 0.26 to 0.34.

“Sustainability and providing customers with products that help ensure the safety of homeowners have long been top priorities at CertainTeed,” says Dale Walton, residential products manager for CertainTeed Roofing. “And, the recent ratings from Intertek and the CRRC serve as proof of this commitment. With Presidio, specifiers and contractors will have the peace of mind to install the highest quality energy-efficient, fire- and weather-resistant roof, all while more easily meeting project certification goals.”

Each easy to install Presidio panel has overlaps that conceal the joints and create a seamless appearance. Presidio Tile embodies the same Mediterranean magnetism of traditional clay, but weighs hundreds of pounds less, and at a fraction of the cost. Presidio Shake is pre-weathered, aged and distressed to recreate the look of wood. Lastly, Presidio Slate showcases the natural beauty of stone in a lightweight, fully recyclable, energy-efficient material.

Projects: Office and Warehouse

BMC ISSAQUAH, ISSAQUAH, WASH.

Because of the steep slope of this roof, the Columbia Roofing & Sheet Metal crew installed 60-mil Sureweld HS (High Slope) TPO.

Because of the steep slope of this roof, the Columbia Roofing & Sheet Metal crew installed 60-mil Sureweld HS (High Slope) TPO.

Team

Roofing Contractor: Columbia Roofing & Sheet Metal, Kent, Wash.
Project Foreman: Rudy Sanchez

Roof Materials

Because of the steep slope of this roof, the Columbia Roofing & Sheet Metal crew installed 60-mil Sureweld HS (High Slope) TPO. HS TPO contains more fire-retardant chemicals in the membrane to help decrease the spread of fire. In addition, 1/4-inch Securock Glass-Mat Roof Board was installed, which gave the building a Class A fire rating while helping protect against moisture and mold.

TPO Manufacturer: Carlisle Syntec Systems
Roof Board Manufacturer: USG

Roof Report

BMC Issaquah manufactures doors and high-end cabinetry. The industrial building features a 525-square barrel roof that was very wet and experienced dry rot. The crew replaced nearly 150 sheets of plywood throughout the project.

The main challenge during installation was safety because of the extreme slope. The barrel roof is nearly 60-feet tall from the bottom to the top of the barrel, making installation on the edges difficult because crewmembers had to hot-air weld rolled product on a nearly vertical surface. The HS TPO added another level of difficulty while welding along the edges.

The project was completed on May 1, 2015.

PHOTO: Columbia Roofing & Sheet Metal

Pages: 1 2 3

Congress Votes to Extend Energy-efficiency Tax Deduction for Two Years

The American Institute of Architects (AIA) issued the following statement on Congress’s two-year extension of the 179D tax deduction, which provides up to $1.80 per square foot for the design of energy-efficient buildings. Please attribute the statement to AIA President Russell Davidson, FAIA:

“As architects, we’d have preferred a longer-term extension. With this deduction expiring each year, it has been difficult for us to plan our finances, which in turn has limited the effectiveness of this key incentive for designing energy-efficient buildings.

“Nonetheless, we are pleased members of Congress have voted to extend this tax provision through 2016 as part of the comprehensive budget bill. In addition to providing a benefit to commercial building owners, the 179D deduction encourages federal, state and local government building owners, like public schools or state universities, to build energy-efficient buildings by offering a tax deduction to the designer of these buildings.

“By allowing government entities to transfer the tax deduction to designers of buildings that surpass industry efficiency standards, our profession is able to put in the extra time and effort needed to design the best buildings for our neighborhoods and communities, while government entities can better manage their bottom lines.

“Our 87,000 members strongly support this deduction as one way to encourage the design and construction of buildings that are energy efficient—and save taxpayer dollars in the process. We’d like to see it made permanent.”

A Florida Home Educates Homeowners and Building Professionals and Green Building and Energy Efficiency

Many people visiting Shalimar, Fla., don’t want to miss one of the town’s attractions: a sprawling European-style waterfront estate on Lorraine Bayou. Featuring a 4,000-square-foot main house; 1,600-square-foot carriage house; and 1,200-square-foot guesthouse, the estate offers luxurious finishes and phenomenal views all the way to the Gulf of Mexico.

The EcoSmart Demonstration Home in Shalimar, Fla., is built for durability and energy independence. It features a Gerard Roofing stone-coated barrel-vault metal roofing system that slashes energy costs and adds visual appeal.

The EcoSmart Demonstration Home in Shalimar, Fla., is built for durability and energy independence. It features a Gerard Roofing stone-coated barrel-vault metal roofing system that slashes energy costs and adds visual appeal.


But these qualities only hint at its uniqueness. The structures are built to be highly secure against intrusion, resistant to storms sweeping off the Gulf and able to create their own electricity. All interior lighting, exterior lighting and dock lights are LED lighting fixtures using minimal electricity.

The crowning touch is a stone-coated, barrel-vault metal roofing system that not only resists 170-mph winds, but saves energy, as well. No wonder the electric bill for this three-structure estate is $47 and its gas bill is $14 per month.

Model Estate

This estate, the EcoSmart Demonstration Home, is about 50 miles east of Pensacola. This is the second eco-friendly showcase house I have built; the first eco-friendly showcase house was built in nearby Destin. The Shalimar home is open to visitors as a working educational model of an entirely green residence.

It’s a home but actually set up as a business. I can educate people about the top green products, teaching them about how they work and the benefits of saving energy and money. The demonstration home is designed to allow us to educate people first, and then talk about products.

The crowning touch is a stone-coated, barrel-vault metal roofing system that not only resists 170-mph winds, but saves energy, as well. No wonder the electric bill for this three-structure estate is $47 and its gas bill is $14 per month.

The crowning touch is a stone-coated, barrel-vault metal roofing system that not only resists 170-mph winds, but saves energy, as well. No wonder the electric bill for this three-structure estate is $47 and its gas bill is $14 per month.


Located at 781 Boulevard of the Champions, the EcoSmart Demonstration Home is set near the water on a “point lot” overlooking Lorraine Bayou with extraordinary waterway accessibility to Destin, Choctawhatchee Bay and the Gulf of Mexico. The home is perfect for the site because we have views of everything. On the point, there are barges and sailing clubs coming up. We’re looking behind the bayou to Destin, and behind that is the Gulf. We have great breezes off the Gulf and bayou. We get the trade winds up here; that’s the great thing about this part of Florida.

EcoSmart aims its sustainable products message not just at industry professionals but environmentally minded homebuyers, as well. We’re teaching industry professionals, like architects, probuilders, residential and commercial developers, and consumers interested in eco-friendly construction and sustainability. We also teach university and school groups. We have had officials and executives of Southern Company, which is called Gulf Power here, come by several times to advise us. They’re very excited because the home is green.

Visitors aren’t required to pay an admission fee, but there are requirements to touring the EcoSmart Demonstration Home. It’s open by appointment only to people who have a current project and aren’t just looking. We ask people to bring their builders and architects with them because if we’re educating all of them at once, we’re saving time. We’re getting them started and thinking along the same lines.

Building the Home

Before construction commenced on the EcoSmart Demonstration Home in2009, my team undertook a full year of site work. That endeavor included the installation of an 11-foot-high, 210-foot-long seawall and stepped-down concrete footers 2-feet wide and 2- to 4-feet deep for security purposes.

PHOTOS: Gerard Roofing

Pages: 1 2

GAF Completes Extensive Roof Replacement Project at Corporate Headquarters

GAF has completed an extensive roof replacement project at its new corporate headquarters at 1 Campus Drive in Parsippany, N.J. GAF has been relocating to the new property, which has been completely renovated with quality products in all areas—including, of course, the roof.

GAF worked closely with its Master Select Contractors to ensure the installation of an energy-efficient roofing system at 1 Campus Drive. The system included GAF’s RUBEROID HW 25 Smooth Membrane, EnergyGuard Polyiso Insulation (for high insulation value), and EnergyGuard HD Cover Board (which offers a high R-value and impact resistance). It also included GAF’s single-ply membrane, EverGuard Extreme Fleece-back TPO Membrane. GAF is proud of how EverGuard Extreme Fleece-back TPO Membrane outperforms competitive TPO membranes (based on heat-aging tests), and backs it with a commercial roofing guarantee.

As GAF prepared to move into its corporate headquarters, it was imperative to make sure they had a durable, energy-efficient and easy-to-install roofing system. The combination of GAF EverGuard Extreme Fleece-back TPO Membrane in 2-Part Roofing Adhesive over EnergyGuard HD Cover Board and EnergyGuard Polyiso Insulation set in Olybond, along with RUBEROID HW 25 Smooth Membrane was the perfect system to keep its building dry and comfortable for years to come.

When using EverGuard Extreme Fleece-Back TPO Membrane with Low-Rise Foam Adhesive (compared to EverGuard Extreme Smooth TPO Membrane), the fleece on the back of the membrane provides an added cushioning layer, especially for hail-prone areas. Also, when combining EverGuard Extreme TPO Accessories with EverGuard Extreme Fleece-Back TPO Membrane, it helps save labor (versus field fabrication)—and provides an overall cleaner-looking roof.

UV-resistant Polycarbonate Panels Are Designed to Match Metal Sheet Profiles

UNITREX 2.67- by 7/8-inch and 4.2- by 1-1/16-inch polycarbonate panels are impact-resistant and provide long-term protection against denting, cracking and peeling.

UNITREX 2.67- by 7/8-inch and 4.2- by 1-1/16-inch polycarbonate panels are impact-resistant and provide long-term protection against denting, cracking and peeling.

UNITREX 2.67- by 7/8-inch and 4.2- by 1-1/16-inch polycarbonate panels are impact-resistant and provide long-term protection against denting, cracking and peeling. UNITREX polycarbonate panels are UV-resistant, offering an advantage compared to other siding and roofing panels. UNITREX polycarbonate panels have a non-combustible flame spread rating of 6; less than other non-metallic panels.

UNITREX polycarbonate panels offer:

  • Long-term weatherability.
  • Virtually unbreakable strength.
  • Lightweight for easy installation.
  • Operating temperature range: -40 F to 212 F.
  • Optical clarity.
  • Impact resistance.

UNITREX 2.67- and 4.2-inch polycarbonate panels are clear as glass and more resistant to breakage. In addition, 2.67- and 4.2-inch panels offer more impact resistance compared to acrylic panels. The panels are half the weight of glass and thus easy to handle and install, durable, energy-efficient and easy to fabricate.

2.67- by 7/8-inch panels are available in clear and green translucent. 4.2- by 1-1/16-inch panels are available in clear, green translucent and opaque white. The panels are designed to match the profiles of metal sheets in the steel building industry.