Pre-Notched Trims and Flashing Components Save Time at the Jobsite

ATAS pre-notched trims and flashing are consistent dimensionally and provide an aesthetically pleasing final installation.

ATAS pre-notched trims and flashing are consistent dimensionally and provide an aesthetically pleasing final installation.

ATAS International Inc. has expanded its line of pre-notched trims and flashing components.  Trims and flashing are often critical elements of metal roof, wall and soffit installations.  They provide weather resistance of the installed system, as well as aesthetic value of the finished building.  ATAS can provide solutions that address both of those elements which can help to control costs.  
 
Common problems that occur in metal panel trim and flashing installation include maintaining the correct overlap distances.  As well, heavier gauges and multiple bends or complex shapes may make field notching difficult.  The quality of workmanship in creating trims and flashings in the field are not as easily controlled compared to factory fabrication, and the time to perform this operation in the field is typically longer.
 
ATAS trims and flashing are consistent dimensionally and provide an aesthetically pleasing final installation.  The use of these components eliminates unknown field costs and results in an efficient installation, which saves the contractor time and money. 

Sealant Adheres to Various Substrates

Titebond Roof Plus Sealant

Titebond Roof Plus Sealant

Varied substrates comprise roofing materials, and contractors need a roofing sealant sufficiently versatile to adhere to as many of them as possible. Now, they have one, with the introduction of Titebond Roof Plus Sealant.

Titebond developed its newest roof sealant for a wide variety of roofing applications, such as metal trim, solar roof systems, architectural metals, painted metals, aluminum and general roofing projects. It provides excellent adhesion to a range of substrates: shingle and tiled roofs, sheet roofing, metal roofs, wood forms, flashings, edge and ridge tiles and liquid applied roofs. In addition, contractors can apply the sealant in temperatures from 20 F to 100 F, advancing its status as a great all-around roof sealant.

Titebond develops its adhesives and sealants with the professional contractor in mind, so it’s no surprise that its newest sealant offers performance characteristics that will appeal to the pro – and, by extension, the skilled DIYer. Beyond the wide application temperature range, Roof Plus can speed up application, increasing contractor productivity. The ready-to-use formula requires no messy, time-consuming mixing; the contractor simply inserts the cartridge in the gun and tools for quicker application and neater joints. It easily fills properly prepared joints one-quarter to two-inches wide. In addition, its clear formulation blends with most substrates – although the contractor can paint it with any non-rigid paint within just two hours.

However quick the application time, when cured, Titebond Roof Plus Sealant is an extremely long-lasting, supple sealant. It provides a weather-tight seal with 560 percent elongation and 25 percent total joint movement. The contractor can leave the job site confident that the sealant will meet high performance standards.

The newest Titebond sealant also complies with ASTM C-920 Type S Grade NS Class 12.5 Use T, NT, M, A and O; Federal Specification TTS-00230C Type II Class B; and SCAQMD Rule #1168.

Titebond Roof Plus Sealant is available in 10.1-ounce cartridges through building materials suppliers and hardware stores. It joins a full line of Titebond caulks and sealants for siding, roofing, multi-purpose, interior and specialty applications.