Double Cutting Action of Shears Conserves Materials

The double cutting action of the shears transfers any distortion produced in cutting to a waste strip, leaving behind material edges that are not rough or burred.

The double cutting action of the shears transfers any distortion produced in cutting to a waste strip, leaving behind material edges that are not rough or burred.

Kett Tool Co. helps body shop owners, metal fabricators and bus, car and truck repair experts conserve materials with the double cutting action of the KD-442 Double-Cut Shears. When cutting cold rolled (C.R.) mild steel and stainless steel, the double cut action of the KD-442 transfers any distortion produced in cutting to a waste strip, leaving behind material edges that are not rough or burred to allow maximum use of sheet material.
  
Kett’s KD-442 shears use a five-amp pistol grip, 0-2,500 RPM variable-speed electric motor that cuts through C.R. mild steel (up to 16 gauge), most grades of stainless to 18 gauge, sheet metal, spiral pipe, metal doors and metal studs, all at speeds of up to 170 inches per minute. The shears weigh five pounds and have close cutting blades that can cut a radius as small as 7-inches, making the shears both portable for location usage and durable for daily shop operations. All shear heads are precision made in the U.S. featuring A2 tool steel blades.

The KD-442 Double-Cut Shears are available through authorized dealers. For more information or to locate a dealer, visit here or call (513) 271-0333.
 

Shear Cuts Metal while Conserving Materials and Costs

Kett Tool Co.’s KD-400 18-Gauge Double-Cut Shears help manufacturers and contractors conserve materials and cut costs. The shears deliver precision cuts in cold rolled (C.R.) mild steel, stainless steel, aluminum, plastic and Formica without warping or bending the original material or the finished piece.

Kett Tool Co.’s KD-400 18-Gauge Double-Cut Shears help manufacturers and contractors conserve materials and cut costs.

Kett Tool Co.’s KD-400 18-Gauge Double-Cut Shears help manufacturers and contractors conserve materials and cut costs.

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste strip, leaving behind material edges that are not hardened or burred to allow maximum use of sheet material. The blades’ swiping action also seals edges of coated metals.

Kett’s KD-400 shears use a 5-amp, variable speed, 2,500 RPM electric motor to produce straight or contoured cuts in C.R. mild steel (up to 18-gauge), most grades of stainless steel to 20-gauge, aluminum to 0.080 inches, and plastic or Formica up to 3/32 inches thick—all at speeds of up to 300 inches per minute. The lightweight, maneuverable shears easily follow a scribed line, capable of cutting a radius as small as 6 inches.

The KD-400 Double-Cut Shears are also available with a contour cutting blade 60-21C to cut tighter curves and the HS blade 60-21HS for cutting foam filled doors. All shear heads are precision made in the U.S. featuring A2 tool steel blades for prolonged durability.

The KD-400 Double-Cut Shears are available through authorized dealers.

Shears Feature Curved Blade

The KD-446L Profile Shears features a curved blade configuration for maneuverability when making tight-curved cuts.

The KD-446L Profile Shears features a curved blade configuration for maneuverability when making tight-curved cuts.

Kett Tool Co. introduces the KD-446L Profile Shears, featuring a curved blade configuration for maneuverability when making tight-curved cuts in profile and flat materials.
 
Professionals working in the construction, metal building, metal fabrication, roofing and other industries will appreciate the flexibility of the KD-446L thanks to its lightweight design and ability to cut corrugated and flat metal, as well as soft non-ferrous metals at a radius as tight as three inches. At only 15 inches long and weighing five pounds, the KD-446L provides the versatility to make curved cuts while maintaining comfort and control.
 
The KD-446L features a five-amp pistol grip, variable speed motor that allows users to control speeds from 0 to 2,500 RPMs. The shears cut profile and flat materials up to 18-gauge cold-rolled (C.R.) mild steel, soft non-ferrous metals like aluminum, copper and brass (up to .090 inches thick); wire mesh and many other sheet materials – all at speeds of up to 28 feet per minute.
 
The cutting blades are made from quality steel, heat treated and precision ground for extended operation.
 
To see the KD-446L Profile Shears in action, watch the video here.  
 
KD-446L Profile Shears are available through authorized dealers. For more information or to locate a dealer, visit the website or call (513)271-0333.

Shears Offer Double-cutting Action

Kett Tool delivers maneuverability, flexibility and speed for making smooth, burr-free cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-540 Double-Cut Shears.

Kett Tool delivers maneuverability, flexibility and speed for making smooth, burr-free cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-540 Double-Cut Shears.

Kett Tool delivers maneuverability, flexibility and speed for making smooth, burr-free cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-540 Double-Cut Shears. The Double-Cut Shears’ pistol grip, 2,200 RPM pneumatic motor runs on a 90 PSI power source, delivering time-saving cutting speeds of 180 inches per minute.

Kett’s P-540 shears are capable of cutting up to 14 gauge C.R. mild steel, most grades of stainless steel to 20 gauge and aluminum to .090 inches thick. The variable speed trigger lets the user make smooth, easy starting cuts even in most grades of stainless up to 16 gauge. At only 10 1/2 inches long and weighing just 4 pounds, the pneumatic shears deliver a powerful and precise cut in a compact and portable design. All shear heads are precision made in the U.S. featuring A2 tool steel blades for prolonged durability.

http://www.kett-tool.com/

Double-cut Shears Cleanly Cut Cold Rolled Mild Steel

Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.

Kett Tool provides contractors with maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears.

Kett Tool provides manufacturers and contractors with superior maneuverability for making smooth, straight cuts in cold rolled (C.R.) mild steel, stainless steel and aluminum with the double-cutting action of the P-500 Double-Cut Shears. At only 10 1/2 inches long and weighing just 3 pounds, the pneumatic shears deliver a powerful and precise cut in a compact and portable design.

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste curl, leaving both sides of the cut straight with no need to file or deburr.

Kett’s P-500 shears are powered by a 90 PSI air power source. The variable speed trigger lets you control speed from 0 to 2,200 RPMs and cleanly cuts 18 gauge and lighter C.R. mild steel, most grades of stainless to 20 gauge and aluminum to .090 feet thick. With cutting speeds of 180 inches per minute, the P-500 leaves behind a smooth, straight cut that’s burr free. At only 3 pounds, the lightweight, pistol grip design of the shears offer superior maneuverability and flexibility. All shear heads are precision made in the U.S. featuring A2 tool steel blades for prolonged durability.

Lightweight Shears Easily Cut Cold Rolled Mild Steel

Kett Tool offers maneuverability for cutting corrugated metal with the left curved blade configuration of the KD-446L Profile Shears.

Kett Tool offers maneuverability for cutting corrugated metal with the left curved blade configuration of the KD-446L Profile Shears.

Kett Tool offers contractors, installers and manufacturers maneuverability for cutting corrugated metal with the left curved blade configuration of the KD-446L Profile Shears. The lightweight shears can easily cut cold rolled (C.R.) mild steel up to 18 gauge at a radius as tight as three inches.

The KD-446L features a powerful 5-amp pistol grip, variable speed, 2,500 RPM motor that easily cuts profile and flat materials up to 18 gauge C.R. mild steel, soft non-ferrous metals like aluminum, copper and brass (up to .090-inch thick); spiral duct, wire mesh and many other sheet materials—all at speeds of up to 28 feet per minute. The tool is lightweight at 5 pounds and has a 3-inch cutting radius, allowing for maximum maneuverability when cutting tight curves. The cutting blades are made from high-quality steel, heat treated and precision ground for extended operation.

Kett Tool’s KL-200 Double-Cut Shears Cut and Contour Steel and More

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste strip.

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste strip.

Cincinnati-based Kett Tool Co.’s KL-200 Double-Cut Shears help manufacturers and contractors conserve materials and cut costs. The shears deliver precision cuts in C.R. mild steel, stainless steel, plastic and Formica without warping or bending the original material or the finished piece.

“The KL-200 allows for ease of operation without damaging the final product,” explains Kathy Conlon, president of Kett Tool. “Metal workers in all industries will save valuable time, material and money on the job with this product design from Kett Tool.”

The Double-Cut Shears’ dual blades transfer any distortion produced in cutting to a small 7/32-inch waste strip, leaving behind material edges that are not hardened or burred to allow maximum use of sheet material. The blades’ swiping action also seals edges of coated metals.

Kett Tool’s KL-200 shears use a 4-amp straight handle, single-speed electric motor to produce straight or contoured cuts in C.R. mild steel (up to 18 gauge), most grades of stainless steel to 20 gauge and 3/32-inch-thick plastics and Formica—at speeds up to 300 inches per minute. The lightweight, maneuverable shears easily follow a scribed line, capable of cutting a radius as small as 6 inches. All shear heads are precision made in the U.S., featuring A-2 tool steel blades for prolonged durability.

The KL-200 Double-Cut Shears are available through authorized dealers.

PHOTO: Kett Tool Co.

Shears Cut and Contour Steel

Kett Tool’s KL-200 Double-Cut Shears deliver precision cuts and contours in C.R. mild steel (up to 18 gauge), stainless steel (to 20 gauge) and more materials without warping or bending the original material or finished piece.

Kett Tool’s KL-200 Double-Cut Shears deliver precision cuts and contours in C.R. mild steel (up to 18 gauge), stainless steel (to 20 gauge) and more materials without warping or bending the original material or finished piece.

Kett Tool’s KL-200 Double-Cut Shears deliver precision cuts and contours in C.R. mild steel (up to 18 gauge), stainless steel (to 20 gauge) and more materials without warping or bending the original material or finished piece. The dual blades transfer any distortion produced in cutting to a small 7/32-inch waste strip, leaving behind material edges that are not hardened or burred to allow maximum use of sheet material. The blades’ swiping action also seals edges of coated metals. The shears’ 4-amp straight handle and single-speed electric motor operate at speeds up to 300 inches per minute. All shear heads are precision made in the U.S. featuring A-2 tool steel blades for prolonged durability.