Metal Roof and Wall Panels Provide Industrial Aesthetic to Texas Ranch

Nearly 13,000 square feet of Petersen’s Galvalume Snap-Clad panels was used to clad the roof.

Nearly 13,000 square feet of Petersen’s Galvalume Snap-Clad panels was used to clad the roof.

As many architects can attest, designing a residence for oneself can present challenges. But architect Jack Carson rose to the occasion by creating a striking design for his new home, located on a ranch in the beautiful Texas Hill Country. Design for the 7,000-square-foot residence follows LEED principles and blends a unique palette of “industrial” materials with ultra-modern aesthetics.

“The house is truly on a ranch. We have cattle on the property,” says Carson, president of Carson Design Associates in Austin, Texas. “We wanted to keep the design somewhat in the ranch vernacular but with a contemporary look. The reliance on metal for the roof and cladding and an exposed structure helped create a ranch building feel. We like to think of it as an ‘industrial ranch’ aesthetic.”

The primary wall panel profile utilized was Petersen’s Precision Series panels, of which 2,400 square feet of the 16-inch Galvalume material was installed.

The primary wall panel profile utilized was Petersen’s Precision Series panels, of which 2,400 square feet of the 16-inch Galvalume material was installed.

Several of Petersen Aluminum’s PAC-CLAD profiles contributed to Carson’s success in delivering the desired look. Nearly 13,000 square feet of Petersen’s Galvalume Snap-Clad panels was used to clad the roof. The 16-inch roof panels were rollformed onsite because of extremely tight site conditions and because the only access to the site was via a dirt road that wasn’t wide enough to allow large trucks to deliver factory-formed panels. An additional 3,000 square feet of Snap-Clad panels also was installed vertically as siding around two garages and at specific locations on the house as accent panels.

The primary wall panel profile utilized was Petersen’s Precision Series panels, of which 2,400 square feet of the 16-inch Galvalume material was installed. All wall panels were manufactured at Petersen’s Tyler, Texas, plant.

The underside of the overhanging soffit is clad with Ipe wood that ends with an edge that Carson and Brown describe as “the wing” or “the blade.”

The underside of the overhanging soffit is clad with Ipe wood that ends with an edge that Carson and Brown describe as “the wing” or “the blade.”

The onsite fabrication of the roof panels and the installation of all roof and wall panels was performed by Dean Contracting Co., Kyle, Texas. “The greatest challenge was executing the architects dream for his home,” recalls Jesse Brown, vice president of Dean Contracting. “The design included a myriad of varying geometric shapes on many different planes and a blend of materials that required complex detailing. It was probably one of the top-five most challenging jobs that we have ever done.”

The Petersen profiles highlight the material palette, which also includes Texas limestone sourced directly from the property on which the home sits, Ipe wood, steel beams and a generous amount of glass. “We have great views into the valley with no neighbors,” Carson adds. “A large overhanging soffit covers a large portion of the deck and shades all of the glass.”

The underside of the overhanging soffit is clad with Ipe wood that ends with an edge that Carson and Brown describe as “the wing” or “the blade.” Fabricated with Alcoa Reynobond aluminum composite material (ACM), this transitional element smoothly links the standing-seam roof with the overhanging wood-clad soffit. Petersen functioned as distributor of the Reynobond ACM.

Fabricated with Alcoa Reynobond aluminum composite material (ACM), this transitional element smoothly links the standing-seam roof with the overhanging wood-clad soffit.

Fabricated with Alcoa Reynobond aluminum composite material (ACM), this transitional element smoothly links the standing-seam roof with the overhanging wood-clad soffit.

The decision to use Petersen for the roof and siding was arrived at rather easily. Carson notes: “I was familiar with PAC-CLAD and wanted to use it but also wanted to rely on the builder’s recommendations regarding materials and subcontractors. In our very first meeting with the roofer, Dean Contracting, they brought in samples of PAC-CLAD and recommended using it. That made the decision pretty easy.”

Carson is a big believer in metal as a roofing and cladding material. “We wanted to be as maintenance-free as possible. And sustainability was an important component as well,” Carson says. “We used LEED principles in our design. Metal is far greener than asphalt shingles and other alternatives. It’s just a great option for residential construction.”

The installation went smoothly, Carson adds, primarily because he relied on the expertise of Dean Contracting. “My approach is to listen to the experts. Jesse Brown and his crew worked out the complex detailing. They use metal all the time and are extremely capable. We collaborated as necessary but I basically left it in their hands.”

The Petersen profiles highlight the material palette, which also includes Texas limestone sourced directly from the property on which the home sits, Ipe wood, steel beams and a generous amount of glass.

The Petersen profiles highlight the material palette, which also includes Texas limestone sourced directly from the property on which the home sits, Ipe wood, steel beams and a generous amount of glass.

Brown was quick to give full credit to the crew that was led by Juan Rojas, sheet-metal superintendent. Rojas is a 24-year employee of Dean Contracting and Brown cites Rojas’ attention to function and precise detailing as a main reason why the job turned out so well.

The house—in spite of its size and location in the hot Texas climate and the large amount of glass—is energy efficient. Two inches of rigid insulation was installed under the metal roof and an additional 4 inches of sprayed insulation went under the roof deck. “The heavy insulation and the shade provided by the overhang makes it very energy efficient. The house stays a very constant temperature,” Carson says.

The entire property captures rainwater in 18,000-gallon collection tanks, which is yet another reason for using metal, Carson points out.

When asked about the challenge of designing for yourself, Carson thought it was easier than designing for a traditional client. “I was probably more demanding in ‘getting it right’, but once I knew I had the right design and materials, I didn’t have to convince myself that it was the best direction. There was no negotiation or comprising the design in any way,” Carson says. “The biggest problem any architect has in designing for themselves is in ‘editing out.’ We know all of the possibilities, and being able to prioritize and filter out the unnecessary options is often the hardest challenge.”

PHOTOS: Petersen Aluminum Corp.

A Metal Roof Crowns a Residential New-construction Project

When Charles Callaghan purchased the two vacant lots next to his home in Ponte Vedra Beach, Fla., he thought they would form the perfect location for his family’s dream home. A team comprised of architects, contractors and manufacturers worked together to bring his ideas to life in the form of a new 7,500-square-foot residence. The building’s crowning feature is a metal roof system that was designed to complement the aesthetics of the home and stand up to the harsh oceanfront environment for decades to come.

The roof of the Callaghan residence in Ponte Vedra Beach, Fla., features 12,000 square feet of Petersen Aluminum’s Snap-Clad in Slate Gray.

The roof of the Callaghan
residence in Ponte Vedra
Beach, Fla., features 12,000 square feet of Petersen Aluminum’s Snap-Clad in Slate Gray.

“With the larger lot, we thought we could do something unique to the neighborhood,” Callaghan says. “When we first met with the architect, there were a few keys we wanted to stress. First, we didn’t want a boxy-looking house. We also wanted shingle-style siding and a metal roof. We like the look of the metal roof, we like the durability, and we thought it would be a good way of complementing the shingles on the house.”

At every phase of the project, the team of construction professionals ensured the project was executed with precision, down to the last detail of the metal roof.

THE DESIGN

The house was designed by Jaycox Architects & Associates, Jacksonville, Fla. According to William R. Jaycox, principal, the plan made the backyard pool the home’s focal point. “They wanted to do a casual, shingle-style beach house that wasn’t like everyone else’s house,” Jaycox notes. “We designed the house so it was mostly single-story and spread it out around the pool, which made for an interesting roof design. It’s all in small modules.”

The L-shaped home features a master-bedroom suite on one side while the other side contains the living room, dining room, kitchen, family room and guest bedroom. “This one also has a four-car garage under the main roof, and, because the house wraps continuously around the pool, you get a fun little foyer in the front with a little cupola up above, you get the dormers for the bedrooms in the attic, and the master suite is a little pod unto itself,” Jaycox adds. “The back has a pool pavilion separate from the house. When you put all of those elements together, you get a very interesting structure, and the metal roof was perfect because it accentuates the lines.”

The roof system specified included 12,000 square feet of aluminum panels in the cool-color Slate Gray. “This house is only a few blocks from the ocean, and in those cases we typically use aluminum,” Jaycox says. “We’ve had great success with that system. It’s absolutely bombproof from a corrosion standpoint with stainless fasteners, heavy-gauge aluminum and the Kynar finish.”

Thorne Metal Systems installed a high-temperature, self-adhered underlayment beneath the metal roof, as specified.

Thorne Metal Systems installed a high-temperature, self-adhered underlayment beneath the metal roof, as specified.

When applied by a certified installer, the system can qualify for a 20-year Oceanfront Finish Warranty from the manufacturer. In addition, the roof meets all Florida’s tough building-code requirements. The system, consisting of 0.040-gauge aluminum, 16-inch-wide panels with fastening clips spaced at 24-inches on-center, carries a Miami-Dade NOA with a -110 PSF uplift. (The UL 90 uplift is -52.5 PSF.)

THE INSTALLATION

The roofing contractor on the project was Thorne Metal Systems of Middleburg, Fla. Owner Bill Thorne has been installing metal roofs since 1989. He formed his own company 13 years ago, and it has become the go-to metal roof installer for Jaycox Architects
& Associates and the general contractor on the project, C.F. Knight Inc., Jacksonville.

Thorne has a lot of experience installing this particular aluminum roof system. “The system is a very easy system to install,” he says. “It’s very user- friendly. The panels have male and female joints that snap together and are held in place with stainless-steel clips.”

PHOTOS: Petersen Aluminum Corp.

Pages: 1 2 3