S-5! Relaunches Website With Calculator, Expanded List of Metal Roof Systems

S-5! has relaunched its website to provide an easy-to-navigate center showcasing the increasing applications of its products. The updated site (S-5.com) contains S-5!’s new Master Snow Retention Calculator, used to help architects, specifiers, contractors, roofers and building owners determine what snow retention system works best for each roof. More than 150 metal roofing manufacturers are listed on the site as compatible components with S-5! systems. Projects also may obtain an Engineered Stamp on the site for ColorGard certifications run through the calculator. Other features available on the website include new product pages, new brackets pages, new Global Distribution pages, load tests and lab reports. It also offers a Resource Center and a Clamp-to-Seam tool to match profiles with the clamp needed.

Snow Retention System Matches Roof Color

AceClamp/PMC Industries Inc. has released its COLOR Snap snow-retention system that matches the color of a standing-seam roof.

AceClamp/PMC Industries Inc. has released its COLOR Snap snow-retention system that matches the color of a standing-seam roof.

AceClamp/PMC Industries Inc. has released its COLOR Snap snow-retention system that matches the color of a standing-seam roof. The system’s retention bar snaps into retaining clips that have been pre-installed on AceClamp’s SSMR fasteners. Installers then tighten the bolts on the clips to secure the bar in place. A color-matching, 2-inch-wide metal strip is then inserted into the bar’s front-facing groove, blending the rail system into the color scheme of the roof.

Polymer Shakes Mimic Cedar while Protecting Historic Estates

When it was time for homeowners at the historic Fleur du Lac Estates in Homewood, Calif., to select new roofing materials, they looked for a product that would mimic the look of cedar but bring them advantages to protect their homes and buildings from Mother Nature. After a comprehensive search, they determined that the Class A fire and Class 4 impact ratings of Bellaforté polymer shake tiles from DaVinci Roofscapes met their needs.

The Class A fire and Class 4 impact ratings of the Bellaforté tiles bring peace-of-mind to residents within the Fleur du Lac Estates, Homewood, Calif.

The Class A fire and Class 4 impact ratings of the Bellaforté tiles bring peace-of-mind to residents within the Fleur du Lac Estates, Homewood, Calif.

A prime filming location for the 1974 movie “Godfather II,” Fleur du Lac Estates is now a private condominium development located on the beautiful west shore of Lake Tahoe. A Yacht Club and Boat House, 22 individual homeowner units and a variety of shared recreational facilities make the historic 1938 compound a much-sought-after retreat.

Fire Resistance a Prime Benefit

Years of harsh weather conditions took their toll on the real cedar shake roofs at Fleur du Lac Estates. Damage from repeated leaks, hail, ice dam issues, snow and other weather conditions recently convinced the board of directors it was time to invest in new roofs for the entire estate.

“We started with our two most valuable community structures, the Yacht Club and Boat House,” says Stewart Dalie, maintenance supervisor and project manager at Fleur du Lac Estates. “Our plans are to reroof all of the buildings in the Tahoe Blend over the next five to seven years. We did a tremendous amount of research to determine what roofing products would look realistic in this setting, meet the new codes required for roofs in our area, yet offer us superior qualities and a long life span.

“Selecting the fire- and impact-resistant Bellaforté shake material from DaVinci Roofscapes means we won’t have to be concerned with the potential spread of flames should our area ever be touched by wildfires. That’s a huge concern for our geographic area. However, not having to worry about wind-blown embers landing on a roof and then catching the building on fire is a tremendous relief.”

The Class A fire and Class 4 impact ratings of the Bellaforté tiles bring peace-of-mind to residents within the community. The durable roofing tiles have the appearance of natural hand-split cedar shake with slanted sawn edges and staggered lengths, but with the hassle-free qualities of a manufactured product. At a 1-inch average tile thickness, Bellaforté Shake roofing tiles remind many residents of jumbo cedar shakes prevalent in the Lake Tahoe area.

The Bruce Olson Construction team incorporated snow fences and snow guards from Rocky Mountain Snow Guards into the structures.

The Bruce Olson Construction team incorporated snow fences and snow guards from Rocky Mountain Snow Guards into the structures.

Safeguarding a Historic Setting

It’s not surprising that homeowners at the upscale Fleur du Lac Estates want to invest in the best possible roofing material. This is a mountain and lakeside homeowners association where every home has a deeded slip in the marina, resort-style services are the norm and aesthetics of the community are vigilantly upheld.

Originally the summer home of famous industrialist Henry J. Kaiser, the 15-acre lake-shore site was constructed beginning in 1938. After Kaiser sold the estate, it went through a series of transitional uses from the 1960s to 1979, including serving as a private school and as the site for many on-location scenes for Francis Ford Coppola’s film, “The Godfather II.” Only in the 1980s did the current project begin to refurbish existing key structures and transform original homes on the property to individually owned homes.

“Our community has always embraced the history of this setting while looking toward protecting its future,” says Lane Murray, general manager at Fleur du Lac Estates. “That’s one of the key reasons we wanted a roofing product that has the look of real cedar shakes but with manmade advantages like resistance to fire, impact and high winds.”

Superior Roofing Installation

Despite a variety of challenges with removing the old roofs and prepping for the new synthetic shake tiles, the team at Bruce Olson Construction, Olympic Valley, Calif., has successfully tackled their first DaVinci Roofscapes installation project at Fleur du Lac Estates.

“The roofing surface for the Yacht Club and Boat House were in bad shape and very uneven,” says Taylor Greene, general manager of Bruce Olson Construction. “We had to plane these into workable surfaces before getting started. Once we got started the product installed beautifully. We added flashing material to cover some valley locations, which made the project look exceptional. To achieve the realistic look, gable end flashing that concealed the manufactured edge of the DaVinci product was added.”

The company, which does residential and multifamily new construction, works in several states, including Hawaii. It has already started work on several additional roofs in the Fleur du Lac complex.

“The Bellaforté roofing looks amazing,” Greene says. “Best of all, these polymer shakes are perfect for this geographic area. Traditional wood shakes ‘hold’ the water from melting snow. Those saturated shakes weigh more and cause the freeze line to be a part of the shake. With the DaVinci product, the water is not absorbed into the tile, so snow melting is faster and more efficient. This can also help reduce the ice damming effect in many locations.”

Laughing at Mother Nature

Nestled amidst stunning mountain peaks and world-famous ski conditions, Fleur du Lac Estates can experience heavy snowfall during the winter months. The property is just five minutes from Homewood Mountain Ski Resort and the area usually sees snow in excess of 180 inches total. That’s one reason why the community decided to have the Bruce Olson Construction team incorporate snow fences and snow guards from Rocky Mountain Snow Guards into the structures.

“In our area it’s very common to use snow guards and fences to help keep snow from falling on individuals and property,” Greene explains. “The previous structures at Fleur du Lac Estates didn’t have any type of snow-retention system. We believe having these products in place now—which were very simple to put in during the polymer shake installation—will make life much easier for property owners no matter how much snow Mother Nature delivers each season.”

Rocky Mountain Snow Guards custom designed the snow-retention system for Fleur du Lac Estates, incorporating its Drift III+ snow fences and Rocky Guard RG10 snow guards. The system was developed to handle the 180-PSF snow load that can occur in this geographic location.

“The snow guards are attached in a pattern above the snow fence that creates friction to hold the snow ‘slab’ in place while the snow fence provides a barrier beyond which the snow slab won’t slide,” says Lars Walberg, president of Rocky Mountain Snow Guards. “Using the combination of snow guards and snow fences gives this project a balanced snow-retention system that has the ‘look’ the owners desired.”

For homeowners, the new Bellaforté roofs on the Yacht Club and Boat House are tempting reminders of what will be on their own homes in the years to come.

“Now that the Yacht Club and Boat House roofs are complete we’re hearing very positive comments from our residents,” Murray says. “Folks are eager for the work to continue in the common areas so that their individual homes can soon get these terrific-looking new roofs!”

Snow-retention System Is Aesthetically Pleasing

Sno Gem Inc. has introduced Sno Blockade, a permanent snow-retention system that is aesthetically pleasing on standing-seam metal roofs.

Sno Gem Inc. has introduced Sno Blockade, a permanent snow-retention system that is aesthetically pleasing on standing-seam metal roofs.

Sno Gem Inc. has introduced Sno Blockade, a permanent snow-retention system that is aesthetically pleasing on standing-seam metal roofs. Choose between a 1- or 2-inch bar, available in standard mill finish aluminum or painted in a powder coating or Kynar finish. Sno Blockade fastens to almost any standing-seam metal roof system, employing the company’s WaveLock technology with three points of attachment without penetration, in conjunction with the Sno Blockade clamp. To reduce melting snow and ice from sliding underneath the bar, the company offers the Blockade Plate, which is installed on the upslope side of the bar. The standard Blockade Plate width is 3 inches but custom sizes are available.

Snow-retention System Designed Specifically for New Elementary School

Alton Hall Elementary School, Galloway, Ohio, recognized the need for snow retention and specified the Sno Barricade from Sno Gem Inc. to be attached to the standing-seam roof.

Alton Hall Elementary School, Galloway, Ohio, recognized the need for snow retention and specified the Sno Barricade from Sno Gem Inc. to be attached to the standing-seam roof.

Providing a safe and healthy environment for students is clearly a high-ranking consideration in the construction of an elementary school. Architects for the Alton Hall Elementary School in Galloway, Ohio, recognized the need for snow retention and specified the Sno Barricade from Sno Gem Inc. to be attached to the standing-seam roof.

“We specified the Sno Barricade because of its proven durability and performance,” says Mike Parkinson, associate project manager at SHP Leading Design of Cincinnati. “We’ve used the Sno Barricade on dozens of projects. I can’t remember the last time it wasn’t on one of our projects. The system is designed specifically for each project by Sno Gem. With the design criteria, they run calculations for the project and prescribed a two-rail system around the entire roof to protect the occupants from potential sliding snow and ice.”

With a layout of the standing-seam metal roof, considering slope, length of run, panel width, annual snowfall and other factors, Sno Gem calculates the best snow-retention solution. “Every metal roofing layout is different and each one requires its own calculations,” notes Jim Carpenter, vice president of Operations at Sno Gem. “Our calculations are based on results obtained from extensive testing of our clamps.”

After receiving the design criteria, Sno Gem ran calculations for the project and prescribed a two-rail system around the entire roof.

After receiving the design criteria, Sno Gem ran calculations for the project and prescribed a two-rail system around the entire roof.

For the Alton Hall Elementary School, the Sno Barricade was prescribed by Sno Gem. Rush Architectural Metal Erectors Inc. of Washington, Pa., installed 1,850 linear feet of the Sno Barricade around 100 percent of the perimeter of the building. R.A.M.E. also installed the Barricade Plate on Alton Hall. The Barricade Plate is an accessory designed to hold back thinner amounts of ice and snow that could pass beneath the bar. The Barricade Plate is installed on the upslope side of the bar in the middle of the panel. It’s held in place by a tek screw, not visible from the ground. Like the Sno Barricade, the Barricade Plate is available in a color to match any roofing panels.

The Barricade Plate is an accessory designed to hold back thinner amounts of ice and snow that could pass beneath the bar.

The Barricade Plate is an accessory designed to hold back thinner amounts of ice and snow that could pass beneath the bar.

“Sliding snow and ice is a dangerous problem building owners don’t have to deal with any more because of engineered snow-retention systems,” adds Albert Rush, owner of R.A.M.E. “The Sno Barricade attaches easily and securely without penetrating the panel, so it doesn’t compromise any roofing warranties. The addition of the Barricade Plate provides peace of mind for the occupants, as well as the school district.”

Snow-retention Components Further Slow Snow from Sliding Off a Roof

SnapClip II from S-5!

SnapClip II from S-5!

SnapClip, SnapClip II or SnapClip III are optional components that can be added to your S-5! ColorGard snow retention system to further retard the migration of snow. It has a special integrated rubber “foot” to prevent abrasion of the panel’s finish. SnapClip snaps onto the back of the crossmember and extends down to the flat of the roofing panel.

Snap the SnapClip onto your ColorGard crossmember after installation. One or two clips are used between seams. Mount the SnapClip to the back of the crossmember using the lock that results with the rubber “foot” resting properly on the panel surface. When applying downward pressure on the part, the “toe” should engage the surface of the panel just before the “heel.” Screw SnapClip into place utilizing the provided stainless steel self-tapping screw.

SnapClip II has two locks and is especially made for seam heights of 1 inch (25 mm) and 1 3/4 inch (44.5 mm) snap. It will also fit 2-inch (51 mm) vertical seams but not 2-inch (51 mm) horizontal.

SnapClip III has three different locks and will work on seam heights of 1 3/4 inch (44.5 mm) up to 3 inches (76 mm).

SnapClip should not be used on copper roofs.

Attachment Systems for Standing-seam Metal

S-5! has released the X-Gard pipe snow-retention system and the S-5! Utility System.

S-5! has released the X-Gard pipe snow-retention system and the S-5! Utility System.

S-5! has released the X-Gard pipe snow retention system and the S-5! Utility System. Both can be attached to major standing-seam metal roof profiles without damaging the roof and voiding the roof manufacturers’ warranties. X-Gard spans up to 48 inches and can be purchased as a one- or two-pipe system, depending on project specifics. The Utility System enables easy attachment of signs, banners, light fixtures, gas pipe, antennas, roof walkways, HVAC equipment, lightning-protection systems, condensate lines, stack/flue bracing and more. The Utility System can be rotated 360 degrees for orientation versatility.

S-5 Announces Metal Plus as New Distributor

S-5!, a manufacturer of ancillary attachment technology for the metal roofing industry, has announced its most recent full-line distributor, Metal Plus LLC.

Metal Plus produces a line of standing-seam brackets designed to simplify temporary staging or scaffolding for metal roofing projects. Because the Metal Plus brackets allow contractors to get to work quickly and safely, they make an excellent platform for installing S-5! products. Pairing these two product lines, roofers, contractors and solar integrators can quickly and cost-effectively attach solar arrays, snow retention systems and other ancillaries to metal roofs without damaging the roof.

Rob Haddock, CEO at S-5!, feels confident the relationship is a good fit for both companies and states: “At S-5! we take innovation, development, thorough testing, and proper market introduction very seriously. We pride ourselves in providing only the best solutions in the metal roofing industry, and I have been impressed with Metal Plus’s commitment to the same.”

According to Mario Lallier, owner of Metal Plus: “We realize that becoming a distributor for S-5! marries two great products, destined to make life for metal roofing installers and contractors much easier. The synergy between metal roofs, S-5! clamps, and Metal Plus brackets equals cost and labor savings upwards of 15 to 25 percent.”