Intake Ventilation at the Edge

Air Vent’s The Edge VentAir Vent’s The Edge Vent

Air Vent’s The Edge Vent

Air Vent’s The Edge Vent

Air Vent’s The Edge Vent provides proper intake ventilation for homes with little or no overhang. It’s a rooftop installed, shingle-over intake vent designed based on roofing contractor feedback from the company’s Ask the Expert seminars. It can be used to supplement existing soffit or undereave vents, as well.

The Edge Vent provides 9 square inches of net free area per linear foot to balance with ShingleVent II ridge vents and other Air Vent exhaust vents. The rooftop installation keeps the roofer on the roof. Internal baffles and filter provide weather protection.

The vent is constructed of the same material as industry-trusted ShingleVent II ridge vents. Each 4-foot piece has integrated end plugs on each end. Radius design allows for increased airflow. It features a 3/4-inch low profile and can be used on roofs with a minimum 3:12 slope. Setting tabs on bottom underside assists with installation.

Air Vent offers a limited lifetime warranty and five-year Replacement Plus protection.

Be the first to comment on "Intake Ventilation at the Edge"

Leave a Reply