Workforce Essentials, Clarksville, Tenn.
Roofing and Wall Panel Installer: Modern Heating Cooling Roofing, Clarksville, (931) 647-0815
Architect: Lyle Cook Martin Architects, Clarksville
Metal Panel Distributor: Commercial Roofing Specialties Inc., Nashville, Tenn.
To meet design objectives, four different PAC-CLAD products were selected. The roof uses 20,500 square feet of 16-inch, 24-gauge Silver Metallic Tite-Loc Plus panels. The façade features 7,800 square feet of Precision Series wall panels finished in Sierra Tan and installed vertically. Complementing the façade is 4,000 square feet of 12-inch Almond Flush panels installed as soffit. In addition, 4,520 square feet of 24-gauge Medium Bronze flat sheet was used for fascia and trim.
“The Tite-Loc Plus panels were long—85 feet—and were rollformed onsite,” says Bill Kimbrough Jr., estimator and project manager for Modern Heating Cooling Roofing. “Getting them up to the high roof was a challenge. All other profiles were fabricated and delivered by Petersen. Currently, PAC-CLAD is about the only product we use.”
Metal Panel Manufacturer: Petersen Aluminum Corp.
Workforce Essentials is a private, non-profit organization providing workforce development services for the Tennessee Department of Labor in a nine-county area in the middle of the state. Located on a highly visible urban-infill site, the new Workforce Essentials headquarters and career training center is situated at a “gateway entry” intersection to the downtown district. The new 40,000-squarefoot facility consolidates services that had been provided at agency offices previously scattered around the city. After initially considering renovation of an aging building on the site, the organization’s board of directors determined that construction of a new, energy-efficient headquarters was a better course of action. Good visibility and an easily identifiable aesthetic were important to site selection and building design criteria.
Different departments within the building are visually and strategically defined in separate wings and entrances. The administrative office wing to the south is defined by a vertical brick corner tower and sloping metal roof planes and cladding. The larger career training center portion of the building is introduced by metal wall panels in a calming color palette of Sierra Tan. Thematic entry canopies, protruding aluminum sunshades and aligned horizontal fenestration tie together the architectural composition. The overriding idea is for the building to serve as a machine with different parts working together for a common purpose.
Brad Martin, principal/designer at Lyle Cook Martin Architects, explains: “Workforce Essentials has a variety of regional offices throughout the area it serves. All are different and very few are freestanding. The organization has never really had a corporate look or identity. Now, with this new building, we can incorporate its design features and architectural aesthetics into future new buildings and renovations and begin to develop an iconic look.”
Photos: Petersen Aluminum Corp.