Roof and Wall Insulation Panels

Petersen’s new PAC-Shield line of polyisocyanurate (polyiso) roof and wall insulation products features 10 panels designed to enhance the thermal performance of the building envelope. With the introduction of PAC-Shield insulation products, Petersen retires two PAC-CLAD roof insulation panels and adds seven wall panels, all of which are available in a range of thicknesses and facers.

“Petersen is now able to better satisfy the building performance criteria that architects and designers must address every day,” said Mike Weis, vice president, Petersen. “The addition of the PAC-Shield line of products represents another example of Petersen’s commitment to provide designers and contractors with products needed to complete high-performance building envelope systems for their building owner customers.”

PAC-Shield accessories are available including fasteners, washers, weather resistant barriers (WRBs), tapes, sealants and flashings. More information on the PAC-Shield line of polyiso insulation panels can be found atpac-clad.com/products/insulation

  • PAC-CLAD roof Insulation panels include:
  • PAC-Shield
  • PAC-Shield Coated Glass
  • PAC-Shield Nail Base
  • Wall panel products include:
  • PAC-Shield CI Coated Glass
  • PAC-Shield CI Coated Glass (Class A)
  • PAC-Shield CI Foil
  • PAC-Shield CI Foil (Class A)
  • PAC-Shield CI Ply
  • PAC-Shield CI Ply (Class A)
  • PAC-Shield CI Nail Base

When separated from the interior by a 15-minute thermal barrier, PAC-Shield wall panels can be applied to the exterior or interior of exterior walls. They also are compatible with numerous claddings and finishes including metal, masonry, fiber cement, stucco, terra cotta, mcm, natural stone, stone aluminum. Installation directly on steel studs in a variety of wall assemblies without the need for gypsum sheathing is possible.

Roof applications suitable for PAC-Shield panels include but are not limited to:

  • New construction and reroofing for both commercial and residential projects
  • Standing seam metal roof systems
  • FM class 1 and UL Class A rating projects
  • Single-ply roof systems
  • Ballasted, mechanically attached, fully adhered
  • Modified bitumen systems
  • Built-up roofing: asphalt and coal tar
  • Heavyweight shingles, tile and slate
  • Single-ply roof systems — ballasted, mechanically attached, fully adhered

PAC-Shield wall panels provide continuous insulation for applications like these and more:

  • Standard wood frame
  • FRT wood frame
  • Steel stud
  • CMU and concrete exterior wall constructions

Petersen, a Carlisle company, manufactures PAC-CLAD architectural metal cladding systems in multiple gauges of steel and aluminum. PAC-CLAD products include hidden- and exposed-fastener wall panels, standing seam roof panels, flush- and reveal-joint wall panels, vented or solid soffit panels, perforated metal, coil and flat sheet, composite panels, column covers, plus fascia and coping. All are available in a Kynar-based 70% PVDF Fluropon coating in 46 standard colors and 16 wood grain finishes that include a 35-year finish warranty. Most colors meet LEED requirements and are rated by the Cool Roof Rating Council. Custom colors and weathertightness warranties are offered. BIM and CAD documents are available for most products. Founded in 1965, Petersen’s facilities are located in Illinois, Georgia, Texas, Maryland, Arizona and Washington. 

For more information, visit pac-clad.com.

About the Author

Chris King
Chris King is the editor in chief of Roofing magazine. He has covered the construction industry for more than 20 years, previously serving as editor of Roofing Contractor, managing editor of the Air Conditioning, Heating & Refrigeration News, and associate editor of Plumbing & Mechanical. He can be reached by email at [email protected].

Be the first to comment on "Roof and Wall Insulation Panels"

Leave a Reply