Line of Pitch Pans Can Be Used on Both Horizontal and Vertical Surfaces

ShapeShift line from Mule-Hide Products Co. Inc. The new ShapeShift line from Mule-Hide Products Co. Inc. is a single solution for creating pitch pans for use in virtually any low-slope roofing job, including with smooth modified bitumen systems and on both horizontal and vertical surfaces. The line — consisting of ShapeShift Pitch Pan straight and outside corner sections and MP Liquid Sealant — can be used with EPDM, TPO, PVC, metal, spray polyurethane foam (SPF), elastomeric acrylic coating, smooth modified bitumen and smooth built-up roofing systems.

When filled with JTS 1 joint and termination sealant from Mule-Hide Products, ShapeShift Pitch Pans can be installed on walls, enabling them to be used to flash troublesome cables or conduits penetrating parapet walls when a prefabricated pipe boot will not work. The straight and corner sections feature interlocking joints and snap together to form square and rectangular pitch pans 4 inches by 4 inches and larger.

MP Liquid Sealant is available in White, Black and Gray. It comes in 2-liter foil pouches, with four pouches to a pail. The threaded cap on the foil pouches allows any unused product to be saved for up to 30 days after opening.

ShapeShift Pitch Pans are available in White. Made of a high-strength polymer, the straight sections are approximately 3 inches long and the radius corner pieces measure approximately 2 inches by 2 inches. Cartons contain 16 straight sections or 16 or 48 corner pieces.

For more information, visit www.mulehide.com.

ShapeShift line from Mule-Hide Products Co. Inc.