The Top 40 Products of 2019

The following product roundup features the Top 40 products of the year, as chosen by the readers of Roofing magazine. The products were selected based on the number of reader requests for sales leads through the Reader Action Card in the print issue and the number of clicks on the website, www.RoofingMagazine.com, including those generated through our monthly e-newsletter. The product generating the most leads from each print issue is also featured as our “Roofers’ Choice” product, and the past year’s winners are also included here. If you have a new product you’d like us to consider for a future edition of our Materials & Gadgets section, please email Editor-in-Chief Chris King at chris@roofingmagazine.com.

Water-Repellent Sloping Material Promotes Positive Drainage

Polyglass U.S.A. Inc. launches Polyslope, a water-repellent, fiber-reinforced, cementitious compound designed to address standing water, promote positive drainage, and divert water off the roof. According to the manufacturer, the product is ready to use after adding water and mixing. Polyslope is mixed with 1.2 gallons to 1.3 gallons of water per 50-pound pail. It is easy to screed and paintable after 48 hours. www.Polyglass.us

Roof Vent Designed Specifically for Clothes Dryers

The DryerJack is the first roof termination specifically designed for the demanding needs of venting clothes dryers. Made in the USA of Galvalume and available powder coated in black, brown or white, DryerJacks feature a patented curved damper that meets code requirements and more, according to the company. To safely vent dryers, airflow restriction must be minimized to prevent lint blowback and the fire hazard that creates. A passageway of 21 square inches delivers nearly zero airflow restriction, allowing the dryer to operate at peak performance. www.DryerJack.com

Low-VOC Aerosol Contact Adhesive/Primer Applies Quickly

The new AeroWeb Low-VOC Aerosol Contact Adhesive/Primer from Mule-Hide Products Co. complies with VOC-related regulations in all 50 states. According to the manufacturer, the product delivers aggressive adhesion and a quick drying time while going on as much as 60 percent faster than traditional roller-applied adhesives. It can be used in a wide variety of applications, including adhering standard TPO and standard EPDM membranes to horizontal and vertical surfaces; adhering fleece back membranes to vertical surfaces; enhancing the bond between Mule-Hide F5 Air & Vapor Barrier and various substrates; and priming unexposed asphalt prior to applying Mule-Hide Helix Low-Rise Adhesive for insulation attachment. www.MuleHide.com

Waterproofing Membrane Is Solvent Free

Chem Link launches NOVALINK WM, a waterproofing membrane available in two- or five-gallon pails. NOVALINK WM is a cold-applied, single-component waterproofing membrane that cures by exposure to atmospheric and substrate moisture to form a continuous, tough, reinforced elastic seal. It is solvent-free and compliant with all known environmental and OSHA requirements, allowing its use in confined spaces with standard personal protection equipment. www.ChemLink.com

Structural Acoustical Roof Decks Reduce Noise Levels

Tectum Structural Acoustical Roof Deck solutions from Armstrong Building Solutions provide predictable noise absorption, durability, and sustainability to meet building design needs. Composite roof deck options provide R-values up to 44. By providing noise absorption up to 0.80, the panels often eliminate the need for additional acoustical treatments, providing faster and easier installations than standard steel roof decks. According to the manufacturer, Tectum Roof Decks are an ideal noise reduction solution for large, high traffic, exposed structure spaces such as auditoriums, gymnasiums, arenas, pools, ice arenas and multi-use facilities. www.ArmstrongBuildingSolutions.com

High-Temperature, Self-Adhered Underlayment

Boral Roofing offers its MetalSeal Underlayment, a high-temperature, self-adhered underlayment designed especially for metal roofing but suitable for any roof material in any climate. According to the company, Boral MetalSeal is easy to install and eliminates the need for an excessive number of nails, reducing installation time and cost. The high-strength woven polyester surface remains intact under high foot traffic and provides UV resistance up to six months. It comes in 216-square-foot rolls for a net two squares. www.BoralRoof.com

Vent Secured Roofing System

Carlisle SynTec Systems introduces the VacuSeal Vent Secured Roofing System, which uses special vents that harness the power of the wind to lock roof membranes in place. According to the manufacturer, VacuSeal systems are quick and easy to install and save cost and labor by substantially reducing the amount of glue, ballast, or fasteners a project requires. According to the company, there are no cold-weather limitations for installation and no VOCs or odors. The system is UL certified with uplift certification at 195 psf negative pressure. www.CarlisleSynTec.com

Extended-Length Aluminum Retrofit Drain

Marathon Roofing Productsnow offers an extended version of its Aluminator Retrofit Drain that is 22 inches long. According to the company, the Aluminator Drain is constructed of heavy-duty spun aluminum body, aluminum ring/dome and the ProSeal seal designed to prevent water backup issues. The Aluminator also has the option to be PVC or TPO coated for direct hot-air welding to PVC or TPO membranes. www.MarathonDrains.com

Versatile All-Weather Roof Flashing

New Seal-Fast Repair Hero roof flashing from Mule-Hide Products Co. is an all-system, all-weather maintenance and repair product. The solvent-based, fiber-reinforced terpolymer sealant adheres to all roof substrates, including asphalt, modified bitumen, metal, TPO, EPDM, PVC, Kynar, concrete, Elvaloy/PVC, Hypalon (CSPE) and polyisobutylene (PIB). According to the manufacturer, Repair Hero can be applied to dry or wet surfaces and under water. It can be used in any weather and in any ambient temperature. Repair Hero complies with VOC-related regulations in all 50 states and does not need to be mixed or stirred before use. www.MuleHide.com

Bulk Material Warmer Protects Temperature-Sensitive Products

Powerblanket Hot Boxes are designed to efficiently heat temperature-sensitive materials such as roofing materials, paints, chemicals, epoxies, resins, equipment, and pallets of any material. Easily assembled, taken apart, and moved from job to job, hot boxes are ideal for cold-weather storage and freeze protection, as well as transporting, jobsite heating, remote location use, and winter roofing projects. According to the manufacturer, the Hot Box can protect critical, temperature-sensitive materials and extend the roofing season and limit downtime to maximize profits. It is safe to leave on overnight for immediate use the next day. www.Powerblanket.com

Silicone-Infused Elastomeric Roof Coating

Nationwide Protective Coatings Mfrs. Inc. introduces PERMASIL, a new silicone-infused bright white elastomeric acrylic, ceramic insulating, waterproofing protective roof coating. The water-based, energy-saving formula is designed to beautify, protect and extend the life of roofing surfaces. Silicone technology adds extra waterproofing protection by sheeting off water from the dried coating surface. According to the manufacturer, the product is easy to apply and comes with a 15-year warranty. www.NationwideCoatings.com

Rooftop Walkway System Features Integrated Safety Railing

Kee Safety Inc. introduces Kee Walk with Guardrail, an OSHA-compliant rooftop walkway system with an integrated safety railing. Designed to provide a secure, anti-slip walking surface on all roof types including metal profile and standing seam roofs, Kee Walk with Guardrail accommodates steps, traverses, and sloped roofs with pitches up to 35 degrees, according to the company. Kee Walk with Guardrail helps to eliminate potential fall hazards by presenting a clear demarcation route for personnel accessing the roof. The corrosion-resistant walkway-railing system is compatible with other Kee Safety fall protection products to deliver a complete rooftop safety solution, according to the company. www.KeeSafety.com 

Self-Adhering, High-Temperature Roofing Underlayment

MFM Building Products unveils a high-temperature roofing underlayment, Premium HT Tile & Metal. This self-adhering roofing underlayment is composed of a high-grade, reinforced polyester fabric laminated to a high-temperature asphalt adhesive system. This premium product also has a fiberglass-reinforced core for extreme durability. Product features a 3-inch (7 cm) selvedge edge to ensure a secure, monolithic seal. The surface fabric offers excellent foot traction and for stacking tiles during construction. UV exposure is 180 days. Premium HT Tile & Metal will withstand the high temperatures created by metal and tile roofing with a high temperature rating of 250°F (121°C). www.MFMbp.com

PVC Pressure-Sensitive Cover Strip Eliminates Need for PVC-Coated Metal

Carlisle SynTec Systems introduces Sure-Flex PVC Pressure-Sensitive (PS) Cover Strip, a groundbreaking new product designed to help contractors save time, labor, and money. Carlisle’s new PVC PS Cover Strip is used for stripping-in flat metal edging and eliminates the need for costly PVC-coated metal or two-piece clip-on edge metal. PVC PS Cover Strip is compatible with a variety of metal finishes and is quick and easy to install; no welding is required. Simply apply PVC Step 1 Activator, followed by PVC Step 2 Primer, then install the PVC PS Cover Strip. www.CarlisleSynTec.com

New Roof Coating Products

EPDM Coatings announces the addition of several new products to its roof coating line, including its 97 percent volume solid EnergyMax, Bonding Primers, Rust Inhibitors and Clear-Coat specifically designed for coating skylights, brick and stucco. EPDM Coatings provides its customers worldwide with a full range of products, including many that have been ASTM tested and CRRC rated, Miami-Dade approved, as well as NSF approved for potable water applications. The company offers solutions for almost all types of roofs, including built-up, modified bitumen, metal, concrete, TPO, EPDM and foam. Also, for roofs on a budget, one base coat of the aromatic polyurethane can fix most leaks, and the application can be completed after a year to get the full benefits of a system. www.EPDMcoatings.net

Modified Bitumen Membranes Feature Highly Reflective Granules

Soprema unveils a new-generation of SOPRALENE SG and ELASTOPHENE SG modified bitumen cap sheets enhanced with 3M Highly Reflective Granules. These new-generation granulate-surfaced cap sheets bring improved durability and an even brighter white appearance to the market. Moving forward, the new 3M ultrareflective granule will be integrated into Soprema SG products to create solutions that provide the solar reflective index (SRI) ratings needed to comprehensively meet the highest U.S. and Canadian reflectivity requirements while providing the proven protection factor of multi-ply SBS-modified bitumen systems. The new lightweight cap sheets also feature robust opacity, protecting the asphaltic layer and extending the life span of the rooftop. www.Soprema.us

Porcelain Roofing Tile Replicates Slate, Timber and Clay

Daltile launches its Perennial Porcelain Roofing Tile, which is available in six colors and designs to replicate the look of slate, timber, and clay. According to the manufacturer, Perennial Porcelain Roofing Tiles are easy to install and the low overall weight of Daltile’s Perennial Porcelain Roof System adds to the speed of installation. Daltile utilizes its patented, cutting-edge digital printing process, Reveal Imaging, to produce Perennial’s tile designs. Made in the U.S.A., Daltile’s Perennial tiles offer all of the inherent advantages of porcelain tile: resiliency, longevity, resistance to frost, high breaking strength, imperviousness to water, 110 mph wind rating, Class A fire rating (fire resistant), Class IV hail impact rating, and walkability. www.Daltile.com/roofing

Ladder Personal Fall Arrest Systems Comply With OSHA Regulations

Design Components Inc. offers both rigid rail and cable grab style ladder Personal Fall Arrest Systems (PFAS). This is in response to the OSHA requirements that went into effect on November 19, 2018. OSHA regulations now require that all fixed ladders over 24 feet be equipped with a PFAS. Design Components offers a variety of fall arrest systems that meet the new OSHA and existing ANSI standards. These systems are customizable and are packaged together to include the needed accessories, including the attachment hardware, trolleys, cable grabs, and deluxe body harnesses. www.DesignComponents.com

Sealer Designed Specifically for Metal Roof Applications

Drop-Stop sealer was specifically designed for application to metal roofs and problem areas such as gutters and expansion joints. According to the manufacturer, Dynamic Fastener, Drop-Stop can easily be applied over sloped, contoured surfaces and will give long-lasting, colorful protection. Made from select synthetic rubbers, Drop-Stop is applied as effortlessly as heavy-bodied paints and stretches and recovers to bridge roof joints in which thermal movement can be expected. With 1,500 PSI tensile strength and 600 percent elongation capabilities, the product can singlehandedly tackle most metal repairs. White Drop-Stop is stocked in 20-ounce sausage packs, 1-gallon pails, 5-gallon buckets and 55-gallon drums. www.DynamicFastener.com

Redesigned Strut Support Provides Improved Performance

Green Link Engineering offers its redesigned KnuckleHead Strut Support, which provides improved performance and more visually appealing aesthetics. The new design features a sleeker look with ribs flanking each side of the head. The new strut head features a 1 1/8-inch deep cavity for holding a standard steel strut. When mechanically fastening the strut into place, bolts or screws pass through the side of the head into the metal strut. The new design features a flat surface, instead of the previous curved design, resulting in easier installation and a tighter fit between screw and head. With shear strength of up to 275 psi, Green Link Adhesive/Sealant can replace mechanical fasteners making for easier installation. www.GreenLinkEngineering.com

Capped Skylight Conversion Kit

Kingspan Light + Air offers the Skyco Skylights Capped Conversion Kit, which converts old capless skylights to a more trusted capped system. With the kit, commercial roofers receive a universal fitting Polycarbonate dome, a custom-sized aluminum cap, and Tek Screw with EPDM gaskets. According to the company, using a cap around the perimeter of the polycarbonate dome creates a leak-free seal and eliminates cracking. The custom-fitted aluminum cap is fastened to the skylight frame with Tek-Screws instead of drilling through the plastic dome. Penetrating the dome with screws is a major cause for cracking. www.SkycoSkylights.com

Multi-Width Composite Shake Tiles Resemble Traditional Cedar

DaVinci Roofscapes has added a fourth shake profile to its composite roofing product offering: DaVinci Select Shake. Created with the authentic look of real cedar shake taken from natural wood profiles, the multi-width DaVinci Select Shake tiles resemble a traditional cedar shake look. Available in 8-inch and 10-inch widths, each DaVinci Select Shake tile is 22 inches long and has a 5/8-inch thickness. The 10-inch wide pieces have a simulated keyway to give the appearance of 4-inch and 6-inch width shakes placed together. The unique tile design of DaVinci Select Shake allows for faster installation than previous DaVinci single- and multi-width products. www.DaVinciRoofscapes.com

Polyiso Cover Board Offers Grade 1 Compressive Strength

Johns Manville introduces its ProtectoR HD High Density Polyiso Cover Board. According to the manufacturer, it provides excellent protection and can save time and expense for contractors. With a closed-cell polyiso foam core and inorganic coated glass facers, this high-density cover board has a Grade 1 compressive strength and an R-value of 2.5. The product offers excellent resistance to moisture, hail, wind uplift and puncture, plus its light weight makes it easy to handle. www.JM.com

Attachment Protects Standing Seam Roofs From Retractable Lanyards

SeamSAFE, a provider of fall protection for standing seam roofers, offers its Retractable Lanyard Disks, which fit over SeamSAFE anchors to help protect standing seam roofs from damage caused by dragging or dropping retractable lanyards during roofing projects. The disks serve as a shield to minimize the potential for roof scrapes and surface indentations. The Retractable Lanyard Disk is one of three new attachments designed to extend the utility and versatility of the company’s safety anchors. The other new accessories are SeamSAFE’s ladder attachment and toe board attachment. www.SeamSafe.com

Redesigned Cap Nailer Features Enhanced Magazine

National Nail introduces the newly-enhanced STINGER CN100B Cap Nailer with an innovative design that improves performance with an improved cap magazine for added durability. Lightweight at 4.9 pounds, STINGER’s CN100B features easy loading, upgraded tool life, and utilizes full, 1-inch collated plastic caps; it is capable of firing 200 caps/200 nails before reloading. The Electro Galvanized ring shank nails are 1-inch by .083-inch full round head nails. The unit also includes an installed belt hook, trigger with bumpfire and sequential modes, and durable carrying case. www.StingerWorld.com

Measuring Tape Specially Designed for Applying Architectural Shingles

The Roofers Tape is specially designed for installing 5-5/8-inch architectural shingles. Crew members can mark and layout the roof quickly and accurately without mistakes using the Red Points and Red Arrows as a guide, minimizing waste and saving money. All measurements of 5-5/8 intervals are marked on the 25-foot Roofers Tape. The 5-5/8 layout reveal complies with factory recommended installation, especially with wind damage. The Black Points are also included for marking short vertical starter lines or bond lines on standard three-tab shingles 6 inches before any even 3 feet. www.TheRoofersTape.com

EPDM Membrane Designed to Reduce Installation Time

Firestone Building Products Company LLC (FSBP) introduces FullForce EPDM. According to the manufacturer, FullForce EPDM can be installed more than four times faster than standard adhered EPDM and in temperatures as low as 20 degrees Fahrenheit, allowing contractors to complete more jobs throughout the entire roofing season. The membrane is fully coated from seam to seam with Firestone’s factory-applied Secure Bond pressure-sensitive adhesive. With no seam tape, FullForce can be installed more quickly than traditional EPDM. Additionally, the solution is ideal for occupied buildings, as it contains zero volatile organic compounds (VOCs). www.FirestoneBPCO.com

TW Seam Tape Offers Added Protection for Roof Decks

TAMKO’s TW Seam Tape is used to close sheathing gaps on the roof deck and help keep water from entering the home. TW Seam Tape is a flexible, self-adhering SBS-modified bitumen membrane with a polymer film on the surface and a removable treated release film on the adhesive side. It is applied to all roof deck joints and seams after the roof deck installation, before the underlayment is applied. It is designed for application on a variety of surfaces, including OSB and plywood. It has a textured, skid-resistant surface and comes in 4-inch rolls, with each roll covering 61 linear feet. www.TAMKO.com

Upgraded Adhesive Dispenser Helps Increase Productivity

OMG’s PaceCart 3, the exclusive equipment for dispensing OlyBond500 Insulation Adhesives, offers more robust and faster pumps to help enhance rooftop productivity with the capacity to dispense enough OlyBond500 to apply up to 120 squares of insulation per hour – twice as fast as before. In addition, the PaceCart 3 includes several other features that help improve jobsite productivity including an easy-to-use, ergonomically designed manifold and a simplified electrical system with an easy-to-read voltage meter so contractors know when power is insufficient. Color-coded adhesive trays help prevent cross contamination of Part 1 and Part 2 components. www.OMGRoofing.com

New Line of Leading Edge Self-Retracting Lifelines

Malta Dynamics introduces its Edgehog Leading Edge Self-Retracting Lifelines. According to the manufacturer, the Edgehog line meets ANSI standard Z359.14-2014 for a worker capacity range of 130-310 lbs. Boasting a compact and lightweight design, the Class A Edgehog Leading Edge Self-Retracting Lifelines feature durable housing, a quick-action braking system, an integral shock absorber and a swivel top connection point. The Edgehog units contain shock packs on the end. When the cable becomes isolated over an edge during a fall, the shock pack engages to reduce arresting forces. This puts less force on the worker who has fallen and also doesn’t damage the cable. www.MaltaDynamics.com

Pipe-Style Snow Guards Designed for Tile Roofing

The three-pipe PP235LS from Alpine SnowGuards is height adjustable to 39 degrees to accommodate varying roof pitches. The bracket is available in aluminum mill-finish, powder coated aluminum and brass. The PP235 system’s base plate is sized to match your tile, and is also available in aluminum and brass. The image pictured here is the PP235LS three-pipe height-adjustable system for Ludowici Spanish Tile. www.AlpineSnowguards.com

Skylight Automation System Provides Natural Ventilation

VELUX offers VELUX ACTIVE with NETATMO help ensure a healthier indoor climate by automatically opening the skylights to air out the house. Smart sensor technology monitors CO2, humidity and temperature in the home, while the system also connects to online weather forecasts. It automatically opens the skylights if fresh air is needed inside and automates blinds to help control indoor temperature. Homeowners can also use the VELUX ACTIVE smartphone app to control their skylights even if they are away from the house. www.WhySkylights.com

Nine-Foot Self-Retracting Lifelines

FallTech introduces its DuraTech Personal Leading Edge line of single and twin 9-foot self-retracting lifelines (SLRs). According to the manufacturer, the new products were tested to meet ensure they meet ANSI leading edge standards to help protect against sharp edge hazards. Their innovative design features a lightweight and impact-resistant nylon polymer housing and proprietary integrated dorsal connector that provides a quick and straightforward push-button attachment. SLRs are calibrated for typical walking speeds and are available in single and twin-leg configurations with steel and aluminum snap hook, rebar hook, and carabiner lifeline connector options. www.FallTech.com

Advanced Polymers for the Manufacturing of TPO Membranes

Dow’s portfolio of materials for roofing membranes features advanced polymers for thermoplastic polyolefin (TPO) systems. These proven solutions can help manufacturers develop custom-tailored formulations that fit specific designs, production processes, and end-use requirements. With several advantages over incumbent materials, ENGAGE TR Polyolefin Elastomers (POEs) represent the company’s current state-of-the-art for TPO-based membrane formulations. According to the manufacturer, ENGAGE TR POEs offer an ethylene-based solution that has inherently better longevity, and can be formulated to produce membranes with significantly improved flexibility and broad welding window. The unique design of ENGAGE TR also allows increased filler loading, which can, in turn, be used to improve fire performance. www.Dow.com

Shingle Line Available in Six New Cool Colors

IKO expands its Cambridge Cool Colors shingle line with six new colors that have an increased Solar Reflectance Index (SRI) of 20-plus, exceeding California’s Title 24 minimum standard by 25 percent. The expansion of this line offers three distinct color blends ranging from COOL PLUS, COOL and Natural COOL. The COOL PLUS color selection includes the darker options of Weatherwood, Harvard Slate, Dual Brown and Graphite Black. COOL shingles are available in SRI 20-plus in the medium color blends Canyon Oak and Sand Dune. The original color range, NATURAL COOL, has an SRI of 16-plus with an added benefit of Dual Grey also being algae resistant and Arctic White having the highest SRI of 23-plus. www.IKO.com

New Fluid-Applied Membrane Restoration System

Garland’s first ever fluid-applied seamless membrane, LiquiTec, is designed to form a virtually impenetrable surface over aged modified bitumen, metal and single-ply roof systems, adding years of waterproofing protection. LiquiTec is an aliphatic polyurea coating system with a tightly bonded molecular structure that provides strength and durability similar to truck bed liners. The product is built to protect roof surfaces from damage caused by hail, foot traffic, wind scour and other impact. According to the manufacturer, LiquiTec fully and partially reinforced systems exhibit extremely high tensile strength and remain flexible at temperatures down to -60°F (-51°C), which helps keep the coating from cracking or becoming brittle to ensure a complete watertight seal and long-term waterproofing protection. www.Garlandco.com

Ladder Extension System Helps Provide Safe Access to Rooftops

The Safe-T Ladder Extension System from Dynamic Fastener easily attaches to most standard extension ladders and allows for safe and easy access to rooftops. According to the manufacturer, it requires no tools, drilling, or bolting to install, and once installed, it provides two offsetting handrails that offer a point of walk-through to step on or off the ladder. This item will allow workers to comply with OSHA standard 1926.1053(b), which states, “When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet above the upper landing surface to which the ladder is used to gain access.” www.DynamicFastener.com

HDPE Step Flashing Offers Two Color Options

NuStep Flashing launches its innovative step flashing manufactured from high-density polyethylene (HDPE). The patented product was specifically designed to provide a faster, easier, and safer way for crews to install step flashing. According to the company, it is 75 percent lighter than traditional metal flashing with a pliability that is easier and safer to work with. Each piece of flashing has two color options. NuStep Flashing is manufactured in the U.S.A. and every production run goes through extensive testing using the ASTM process for impact, tensile, puncture resistance and UV exposure. NuStep Flashing has been recognized and certified by the International Code Council and is backed by a limited lifetime warranty. www.NuStepFlashing.com

Cut-Resistant Gloves Designed to Help Prevent Jobsite Injuries

PrimeSource Building Products introduces a new range of cut-resistant gloves under its GRX brand. According to the manufacturer, the new range will provide better cut protection and more durability, without sacrificing comfort or dexterity. The 700 Series features PalmWick Breathable Palm Technology, which allows the hand to breathe on the palm side of the glove. The 600 Series features the ExaGrip Latex Palm, which combines best in class durability and grip. The new cut-resistant technology meets ANSI standards and comes in a range of ANSI A-2 (500 grams to cut) for light to medium cut protection, all the way up to ANSI A-6 (6,000 grams to cut) for extreme cut hazards on the job. www.PrimeSourceBP.com

Concrete Tile Lines Available in New Suite of Colors

Boral Roofing LLC unveils the Vista Collection. The new concrete roof tile options include five new varied neutral shades introduced to meet specific architectural, lifestyle and color trends emerging within the state of Texas. The new suite of hues is available with two of Boral Roofing’s most popular tile styles in the region – Saxony Country Slate and Shake. The shades include Charcoal Brown Blend, Chestnut Burnt, Dark Bordeaux, Weathered Cedar and Weathered Greige. The collection launch is a direct result of extensive research conducted into consumer lifestyle and home design trends happening within the state. The concrete tile offers a Class A fire rating. www.BoralRoof.com

LINE-X Announces Winners of ‘Race to the Finish’ Sweepstakes

LINE-X, a retail automotive aftermarket franchise and provider of high-performance spray-on bedliners, announced the winners of its NASCAR “Race to the Finish” Sweepstakes. Thousands of fans swarmed to LINE-X’s Facebook Fan Page and their local LINE-X stores to enter. Congratulations to the grand prize winner, Steve Rhodus from Avondale, Ariz. Steve and his family traveled to the Daytona 500 Race and have been gifted a race hood signed by Alex Bowman and Dale Earnhardt Jr. The lucky winner of a signed race suit is Ray Fritz from Hackettstown, N.J. and the signed race helmet winner is Lori Rich from West Newfield, Maine.

“We are thrilled to finally announce the winners of our Race to the Finish Sweepstakes for 2015. Sponsoring Alex Bowman’s race car was an honor for us and we know how excited Steve, Ray and Lori are as true fans of the sport and of LINE-X,” says Kevin Heronimus, CEO of LINE-X Protective Coatings. “As LINE-X continues to gain momentum in world of sports, we hope our fans will be on the lookout for more opportunities to win big like this in the near future.”

“As a huge fan of LINE-X and NASCAR, we can’t thank LINE-X enough for choosing us as grand prize winners of their NASCAR Race to the Finish Sweepstakes and for their hospitality through the whole process,” says Steve Rhodus, winner of the LINE-X NASCAR sweepstakes. “When we were notified that we were the grand prize winners of four tickets to Daytona 500 and a race hood signed by Alex Bowman and Dale Earnhardt Jr., we couldn’t believe it. Our thoroughly planned, all-inclusive trip to Florida for the race was more than we could have ever dreamed of and thanks to LINE-X, those are memories our family will forever hold dear to our hearts.”

After powering the No.5 LINE-X Chevrolet, fielded by JR Motorsports and piloted by Alex Bowman for the NASCAR XFINITY Series race at Phoenix International Raceway last November, LINE-X kicked-off a three month sweepstakes. Fans were given the opportunity to win the hood off of the No.5 LINE-X Chevrolet race car, Alex Bowman’s race suit and helmet and four tickets and pit passes to the 2015 Daytona 500. The race suit, helmet and hood were signed by Alex Bowman and JR Motorsports co-owner, Dale Earnhardt Jr. The “Race to the Finish” Sweepstakes began in November 2014 and ran through the beginning of this year.