Ladder Extension System Helps Provide Safe Access to Rooftops

The Safe-T Ladder Extension System from Dynamic Fastener easily attaches to most standard extension ladders and allows for safe and easy access to rooftops. According to the manufacturer, it requires no tools, drilling, or bolting to install, and is one of the most effective means of improving the safety of nearly any ladder. Once installed, it provides two offsetting handrails that offer a point of walk-through to step on or off the ladder.

This item will allow workers to comply with OSHA standard 1926.1053(b), which states, “When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet above the upper landing surface to which the ladder is used to gain access.” 

For more information, visit www.dynamicfastener.com.

Standing Seam Roof Clamp Accommodates Variety of Seam Profiles

Dynamic Fastener offers the Standing Seam Roof Clamp, which installs over the clip on a completely seamed, attached roof section a minimum 4 feet or further from the edge with no damage to roof panels or finished seams and no roof penetrations. The clamp accommodates seams up to 1 inch wide, and the unique “flip” design of the DFSSRC-03 allows for fit on both the Butler MR24 and Butler VSR-style seams just by removing the bolts, turning one side of the clamp around the ring and replacing the bolts. According to the company, any roof that meets similar loadings, specifications, and codes of the Butler styles will accept these anchors for safety tie off. 

A safety lanyard, of a maximum length 6-foot length, with a deceleration (shock absorber) device and full body harness should be used with the clamp. Clamps have been tested to meet and exceed the following OSHA standards: 1926.502 (d) (2), (3), (4) and (15): Anchorages for attachments of personal fall arrest equipment.

For more information, visit www.dynamicfastener.com.

Pipe Flashings for Metal Roofs Available in a Variety of Colors

Dynamic Fastener’s DYNA-FLASH pipe flashings for metal roofs are designed for maximum resistance to all weather conditions. The pipe diameters can be seen clearly for proper fitting. The base is designed to mold to most panel configurations and roof pitches regardless of pipe location. EPDM flashings are available in 12 colors: Brown, Black, Dark Grey, Light Grey, White, Dark Green, Light Green, Dark Blue, Light Blue, Bright Red, Terra Cotta and Copper. High-temperature silicone flashings are available in Red and Grey. 

For more information, visit www.dynamicfastener.com.

Dynamic Fastener Releases Updated Tool and Fastener Guide

Dynamic Fastener has released the newest version of its popular free Tool and Fastener Hand Guide. This one-of-a-kind resource provides many answers to common and uncommon issues that arise in the Metal Building Industry. The 140-page full-color publication, provides clear and concise answers to questions pertaining to fastener applications, engineering data, availability of types, size ranges and fastener materials. In addition to discussing screws and anchors, the Hand Guide provides prices and other useful information relating to rivets, flashings, sealants, insulation tapes, safety equipment, hand tools, power tools and more. 

For more information, visit www.dynamicfastener.com

Sealer Designed for Metal Roof Applications

Drop-Stop sealer was specifically designed for application to metal roofs and problem areas such as gutters, expansion joints, etc. Drop-Stop can easily be applied over sloped, contoured surfaces and will give long lasting, colorful protection, according to the company. Made from select synthetic rubbers, Drop-Stop is applied effortlessly as heavy bodied paints. This unique material actually stretches and recovers to bridge roof joints in which thermal movement can be expected. With 1500 PSI tensile strength and 600 percent elongation capabilities, Drop-Stop can single handedly tackle most metal repairs. White Drop-Stop is stocked in: 20 oz. sausage packs, 1 gallon pails, 5-gallon buckets and 55-gallon drums.

For more information, visit www.dynamicfastener.com.

Dynamic Fastener Releases New Tool and Fastener Hand Guide

Dynamic Fastener Dynamic Fastener has released a new version of its popular tool and fastener hand guide. The 132-page, full-color free publication provides concise answers to questions pertaining to fastener applications, engineering data, availability of types, size ranges and fastener materials.

In addition to discussing screws and anchors, the guide provides prices and other useful information relating to flashings, sealants, insulation tapes, safety equipment, hand tools, power tools and more. The 2018 publication also includes details on the Dyna-Guard snow retention system for metal roofs. Dyna-Clamps are also available to accommodate many different profiles of standing-seam metal roofs.

For more information or to order the free resource guide, call (800) 821-5448.