Pro Guard Coatings Receives FM Approval

Pro Guard Coatings has received FM Approval on the Proflex Primer F1524 & 9101 Moisture Cure Liquid Rubber products. Pro Guard Coatings engineers a broad line of coatings for a variety of surfaces.

FM Approvals is an international leader in third-party testing and certification services. By employing a worldwide certification process that’s backed by scientific research and testing, FM Approval recognizes quality products in both technical integrity and performance.

SKYCO Skylights Receives FM Approval for Industrial Skylight

Skyco Skylights can now add Factory Mutual FM Approval to its line of 4×8 industrial skylight.

FM Approvals is a third-party certification and approval of commercial and industrial products for property loss prevention purpose. Their certification assures building owners that Skyco Skylights’ line of 4×8 industrial skylights have been objectively tested and have met or exceeded the standard for quality, performance and reliability for commercial and industrial facilities.
 
“As we continue to grow our national and international presence, FM is a building block necessary in certain specifications. FM Approval is a certification of the quality and performance of our industrial skylights,” explains Skyco Skylights CEO, Ryan Marshall. “We have received support in the Southwestern markets and the FM Approval certification allows us to offer our industrial skylights to markets globally.”
 
The design enabled Skyco Skylights FM Approved skylight to meet a Severe (S) Hail Rating with 2.0 in diameter ice balls, the highest rating available, and a 195 psf high-performance wind uplift rating.
 
Marshall says, “This opens another opportunity for building owners seeking compliance, safety and performance for their buildings when it comes to daylighting products.”
 
The FM Approved industrial skylight is part of Skyco Skylights’ line of SKYPRO 4×8 industrial skylight models. Skyco Skylights uses aluminum framing with a capping system providing performance and longevity in polycarbonate domes. Polycarbonate material is known for its durability and is backed by a ten-year warranty against yellowing and breakage.
 
Skyco Skylights’ line of SKYPRO models boast other certifications, most notable is the ICC-ES Listing (ESR-3837) and UL Listing for its smoke and heat vent skylights. Skyco Skylights is also an active member of the American Architectural Manufacturers Association (AAMA) and a source for industry consulting on safety and daylighting topics.

Roof Assembly Passes Severe Hail Classification

Gaco Western announces their roof assembly passes Severe Hail classification by FM Approvals. The GacoRoofFoam F2733 spray applied polyurethane foam coated with GacoFlex S2100 Cleanable Solvent-free Silicone Coating assembly was tested to meet: hail, wind uplift, corrosion, foot traffic, leakage resistance and accelerated weathering performance. Gaco’s is the only reflective silicone assembly to receive the Severe Hail classification. In addition, this assembly has the highest recycled content in the industry.

Building owners and design professionals are looking for a durable roofing solution. Gaco Western’s R & D team rose to the challenge to develop a system that stands alone and achieves a durability and toughness rating that eclipses other offerings in the reflective silicone coating market. The cleanability factor of GacoFlex S2100 adds to the longevity of this system as it maintains higher whiteness and solar reflectivity than other silicones.

FM Approvals certification is valuable to consumers because it means they can be confident they are getting a tested roof assembly, not a collection of products and parts that may or may not perform to expected levels. Severe Hail classification takes it a step further to give you confidence that Gaco Western offers a solution with strength and endurance.

Chuck Skalski, VP of Sales, GacoFlex commented, “Gaco is pleased to be providing our industry an FM Approved assembly that has been proven to withstand the most hail episodes. This is another testament to our commitment to innovation and providing solutions that last for many years.”

SFS intec Receives FM Approvals Certificate for Induction Welding System

SFS intec received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals for isoweld.

SFS intec received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals for its induction welding system, isoweld.

SFS intec, Wyomissing, Pa., has recently received an FM Approvals Class 4470 Certificate of Compliance from FM Approvals, part of FM Global, for isoweld. isoweld is SFS intec’s induction welding system. This certificate approves use of isoweld for attachment of thermoplastic single-ply membranes (PVC and TPO) within roofing systems offered by several single-ply membrane original equipment manufacturers (OEMS).